weber.tec cable grout

Hazard statements (CLP)

H226, H315, H317, H319, H332, H335, H400

Code

Statements

H226

Flammable liquid and vapour

CLP CLASSIFICATION

Resin component GHS02 Flam. Liq. 3 H226 Flammable liquid and vapour GHS07 Eye Irrit. 2 H319 Causes serious eye irritation. Acute Tox. 4 H332 Harmful if inhaled Skin Irrit. 2 H315 Causes skin irritation STOT SE 3 H335 May cause respiratory irritation Hardener component GHS07 Skin Sens. 1 H317 May cause an allergic skin reaction Eye Irrit. 1 H319 Causes serious eye irritation. GHS09 Environment Aquatic acute 1 H400 Very toxic to aquatic life Filler component Not classified as hazardous.

67/548/EEC

Resin Component Xn R48/20, R20 Xi R36/37/38 R10 Hardener component Xi R43 R07 N R50/53 Filler component Not classified as hazardous.

2.2 Label elements

Resin Component The mixture is classified and labelled according to the CLP regulation.

Hazardous Ingredients

Styrene Benzoyl peroxide

Hazard pictograms

GS07 and GS02 GHS07 and GS09

Hazard statements

H226 Flammable liquid and vapour. H315 Causes skin irritation H319 Causes serious eye irritation. H332 Harmful if inhaled H335 May cause respiratory irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation. H400 Very toxic to aquatic life

Precautionary statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P261 Avoid breathing vapour. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/protective clothing/eye protection/face protection P302+P352 IF ON SKIN: Wash with plenty of soap and water. P304+340 IF INHALED: Remove person to fresh air and keep comfortable for breathing P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 If eye irritation persists: Get medical advice/attention P312 Call a POISON CENTER/doctor if you feel unwell. P362 Take off contaminated clothing P370+P378 In case of fire: Use dry chemical, foam or carbon dioxide to extinguish. P403+P233 Store in a well-ventilated place. Keep container tightly closed Additional statements: Contains phthallic anhydride. May produce an allergic reaction. Hardener component The mixture is classified and labelled according to the CLP regulation. P261 Avoid breathing dust. P264 Wash hands and contaminated skin thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P273 Avoid release to the environment. P280 Wear protective gloves, eye/face protection and protective clothing. P302+P352 IF ON SKIN: Wash with plenty of soap and water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P391 Collect spillage. P501 Dispose of contents and container according to local regulation. Filler component Not classified as hazardous (not applicable).

Signal word

Organic peroxide Type G

PBT Substances

Not applicable

vPvB Substances

Not applicable