webercolor HR, Part A

Saint-Gobain Weber Co., Ltd

Revision date : 2018-09-14

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS05 GHS07
Health risk rating 4
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

14808-60-7

Name of the chemical

Silica, crystalline

Concentration

N/A

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

N/A

EC/CAS

238-878-4

Name of the chemical

Quarz-A-Staub (s. u. TRGS 906)

Concentration

N/A

EC/CAS

236-675-5

Name of the chemical

Titandioxid; [in Pulverform mit mindestens 1 % Partikel mit aerodynamischem Durchmesser ≤ 10 μm] (2020/217)

Concentration

N/A

General Information

Revision date

2018-09-14

Product name

webercolor HR, Part A

1.2.1 Relevant identified uses

Construction chemicals

1.2.2. Uses advised against

No further relevant information available

Emergency telephone

0 2202 4225-7

Icons in SDS

GHS05 GHS07

Company Information

company name

Saint-Gobain Weber Co., Ltd

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H315, H317, H318

Hazard statements

Code

Statements

H315

Causes skin irritation

Section 2

CLP CLASSIFICATION

Results of in vitro- tests have shown that cement based mixtures with more than 1% of cement cause serious skin irritation and serious eye damage, therefore the classification of these mixtures regarding H315 and H318 is not based on the calculation of the ingredients or the pH in this case. GHS05 corrosion Eye Dam. 1 H318 Causes serious eye damage. GHS07 Skin Irrit. 2 H315 Causes skin irritation. Skin Sens. 1 H317 May cause an allergic skin reaction.

2.2 Label elements

Labelling according to Regulation (EC) No 1272/2008 The product is classified and labelled according to the CLP regulation.

Hazard pictograms

GHS05 GHS07

Signal word

Danger

Hazardous Ingredients

cement, portland, white

Hazard statements

H315 Causes skin irritation. H318 Causes serious eye damage. H317 May cause an allergic skin reaction.

Precautionary statements

P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P103 Read label before use. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER/doctor. P362 Take off contaminated clothing. P501 Dispose of contents/container in accordance with local/regional/national/ international regulations.

2.3 Other hazards

The product contains silica sand with less than 1% of fine fraction and therefore is not classified as hazardous; however, pay attention when handling and follow the indications relating to personal protective equipment. The product contains white cement with a content of soluble chromium (VI) below 0.0002% (2ppm), it doesn’t need a reducing agent

PBT Substances

Does not contain PBT substances

vPvB Substances

Does not contain vPvB substances *

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.