Note: Ingredients listed on restricted chemical lists
EC/CAS
25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
>50<80%
General Information
Revision date
2020-03-01
Product name
E.MIX EP 550 MS (EPOXY MORTAR SYSTEM) - PART A
CAS No.
25068-38-6
Icons in SDS
Company Information
company name
Saint-Gobain (Singapore) Pte Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
EIS.info@Saint-Gobain.com
Section 2
SECTION 2: Hazards identification
Methods and materials for containment and cleaning up: Contain spilled material if possible, absorb with materials such as sand or saw dust, remove residual with soap and hot water. Collect in suitable properly labeled containers. HANDLING AND STORAGE
2.1 Classification of the substance or mixture
Skin irrtation Category 2 Eye irritation Category 2A Skim sensitisation Sub-category 1B Acute aquatic toxicity Categorey 2 Chronic aquatic toxicity Category 2
Storage
Storage temperature 2-43oC. Keep container tightly seal.. Handling: Avoid open flames and sources of ignition. Ensure good ventilation at the workplace. EXPOSURE CONTROLS/ PERSONAL PROTECTION COMPOSITION IDENTIFICATION Engineering controls: Ensure good ventilation. Bisphenol A epoxy resins Exposure Limits: Not established CAS# 25068-38-6 >50<80% Control parameters: None Performance additives >5<10% Respiratory Protection: Good ventilation is aliphatic glycidyl ether >15<20% required. Wear mask if required by local regularation.
