Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2021-07-29
Product name
Sabre Surface Activator
CAS No.
67-63-0
1.2.1 Relevant identified uses
Surface cleaner and activator for removing surface contaminants from non porous substrates and to improve adhesion prior to using FORMOA adhesives
1.2.2. Uses advised against
Refer to Section 15
Emergency telephone
+61 2 9098 8244
Icons in SDS
Company Information
company name
Sabre Adhesives Ltd
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H225, H303, H316, H319
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Australia NOHSC – Is hazardous according to Safe Work Australia NOHSC 2011 National Code of Practice NZ - This substance is hazardous according to The HSNO (Minimum Degrees of Hazard) Regulations 2001 NZ - EPA Approval Code: Cleaning Products (Flammable) - HSR002528
Hazard pictograms
Flammable Irritant
Signal word
DANGER HSNO Class.
Hazard categories
3.1B H225 Highly flammable liquid and vapour. Category 2 6.1E (oral)-NZ only H303 May be harmful if swallowed. Category 5 6.3B H316 Causes mild skin irritation. Category 3 6.4A H319 Causes serious eye irritation. Category 2A
Prevention
P102 Keep out of reach of children. P103 Read label before use. P210 Keep away from heat, sparks, open flames or hot surfaces. No smoking. P233 Keep container tightly closed. P240 Ground/bond container and receiving equipment. P241 Use explosion-proof electrical/ventilating/lighting. P242 Use only non-sparking tools. P243 Take precautionary measures against static discharge. P264 Wash hands thoroughly after handling. P280 Wear protective clothing.
Response
Code P101 If medical advice is needed, have product container or label at hand. P312 Call a POISON CENTER or doctor/physician if you feel unwell. P303 + IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with P361+P353 water/shower. P305 + IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if P351+P338 present and easy to do. Continue rinsing. P332 + P313 If skin irritation occurs: Get medical advice/ attention. P337 + P313 If eye irritation persists: Get medical advice/attention. P370 + P378 In case of fire: Use CO2, sand, extinguishing powder for extinction.
Storage
Code P403 + P235 Store in a well-ventilated place. Keep cool.
Disposal
Code P501 Dispose of according to the local authorities Composition of hazardous Ingredients Ingredients Wt% CAS NUMBER. Propan-2-ol 50-100 67-63-0 Tetraisopropyl orthotitanate 2.5 -10 546-68-9
