General Information
Revision date
2013-06-21
Product name
218B -00900
Product name
218B -00900
Identification on the label/Trade name
SABIC LLDPE
CAS No.
25087-34-7
1.2.1 Relevant identified uses
May be used to produce molded or extruded articles or as a component of other industrial products
Manufacturer Name
SABIC
Emergency telephone
+31 (0)46 476 55 55
Icons in SDS
Company Information
company name
SABIC SALES Europe B.V.
e-mail address of the competent person responsible for the Safety Data Sheet
sds.info@sabic-europe.com
Section 2
SECTION 2: Hazards identification
EMERGENCY OVERVIEW: • Granules with slight or no odor • Spilled material may create slipping hazard • Can burn in a fire creating dense, toxic smoke • Molten plastic can cause severe thermal burns • Fumes produced during melt processing may cause eye, skin, and respiratory tract irritation. Severe over-exposure may result in nausea, headache, chills, and fever. See below for additional effects. • Secondary operations, such as grinding, sanding, or sawing can produce dust which may present an explosion or respiratory hazard. Skin Contact: Not a hazard with granules during normal industrial use. Eye Contact: Resin particles, like other inert materials, are mechanically irritating to eyes. Inhalation: Granule inhalation unlikely due to physical form. Ingestion: Granule ingestion unlikely due to physical form.
Further information
Cool skin rapidly with cold water after contact with molten material. Heating can release hazardous gases. Hazardous fumes can also occur in post-processing operations.
