Poly (acrylonitrile-butadiene-styrene) /Poly (styrene- acrylonitrile) Blend

Hazard statements (CLP)

H350

Code

Statements

H350

May cause cancer

SECTION 2: Hazards identification

OSHA GHS Remark The additives in this product (if any) are bound in a thermoplastic resin matrix. In accordance with GHS for the classification of the product, the hazard potential may be assessed with respect to the physico-chemical form and/or bioavailability of the individual components in the thermoplastic resin. UN GHS says, that even if adverse effects are seen in animal studies or in-vitro tests, no classification is needed if the mechanism or mode of action is not relevant to humans. The European CLP Regulation also mentions, that no classification is indicated if the mechanism is not relevant to humans. Where GHS classifications are shown below, these are based on the individual components in the thermoplastic resin matrix. Under the typical use conditions for the resin, these hazardous components are unlikely to contribute to workplace exposure. Please read the entire safety data sheet and/or consult an EHS professional for a complete understanding

Signal word

Warning Hazard statements H350 May cause cancer Supplemental Hazard The GHS classification is based on theoretical rules for mixtures Statements of chemicals, applied to these components in the resin matrix Under the typical use conditions for the resin, these hazardous components are unlikely to contribute to workplace exposure

Prevention

P201 + P202 Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. P280 Wear protective gloves/ protective clothing.

Response

P308 + P313 IF exposed or concerned: Get medical advice/ attention.

Storage

P404 Store in a closed container.

Disposal

P501 Dispose of contents/ container to an approved waste disposal plant.

2.3 Other hazards

None known. SABIC Emergency Overview Pellets with slight or no odor Spilled material may create slipping hazard. Can burn in a fire creating dense, toxic smoke Molten plastic can cause severe thermal burns Fumes produced during melt processing may cause eye, skin, and respiratory tract irritation. Severe over- exposure may result in nausea, headache, chills, and fever. Secondary operations, such as grinding, sanding, or sawing can produce dust which may present an explosion or respiratory hazard.

Medical Conditions Generally Aggravated by Exposure

MEDICAL RESTRICTIONS: There are no known health effects aggravated by exposure to this product. However, certain sensitive individuals and individuals with respiratory impairments may be affected by exposure to components in the processing vapors.

2.1 Classification of the substance or mixture

bioavailability of the individual components in the thermoplastic resin. UN GHS says, that even if adverse effects are seen in animal studies or in-vitro tests, no classification is needed if the mechanism or mode of action is not relevant to humans. The European CLP Regulation also mentions, that no classification is indicated if the mechanism is not relevant to humans. Where GHS classifications are shown below, these are based on the individual components in the thermoplastic resin matrix. Under the typical use conditions for the resin, these hazardous components are unlikely to contribute to workplace exposure. Please read the entire safety data sheet and/or consult an EHS professional for a complete understanding. GHS classification in accordance with the OSHA Hazard Communication Standard (29 CFR 1910.1200) Carcinogenicity