Polyetherimide [CASRN 61128-46-9]

SECTION 2: Hazards identification

OSHA The additives in this product (if any) are bound in a thermoplastic resin matrix. In accordance with GHS for the classification of the product, the hazard potential may be assessed with respect to the physico-chemical form and/or bioavailability of the individual components in the thermoplastic resin. Where GHS classifications are shown below, these are based on the individual components in the thermoplastic resin matrix. Under the typical use conditions for the resin, these hazardous components are unlikely to contribute to workplace exposure. Please read the entire safety data sheet and/or consult an EHS professional for a complete understanding. Claaslflcatlon

2.3 Other hazards

Not applicable

Further information

Not applicable Other hazards which do not result In claulflcatlon: SABIC Emergency Overview • Pellets with slight or no odor • Spilled material may create slipping hazard • Can burn in a fire creating dense, toxic smoke • Molten plastic can cause severe thermal burns • Fumes produced during melt processing may cause eye, skin, and respiratory tract irritation. Severe over-exposure may result in nausea, headache, chills, and fever. See below for additional effects. • Secondary operations, such as grinding, sanding, or sawing can produce dust which may present an explosion or respiratory hazard.

Medical Conditions Generally Aggravated by Exposure

MEDICAL RESTRICTIONS: There are no known health effects aggravated by exposure to this product. However, certain sensitive individuals and individuals with respiratory impairments may be affected by exposure to components in the processing vapors.