Note: Ingredients listed on restricted chemical lists
EC/CAS
8007-18-9
Name of the chemical
Antimony nickel titanium oxide yellow
Concentration
1-5
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
0.3-1.0
General Information
Revision date
2015-03-24
Product name
FARADEX
1.2.1 Relevant identified uses
May be used to produce molded or extruded articles or as a component of other industrial products
Manufacturer Name
SABIC Innovative Plastics US LLC
Emergency telephone
800 424-9300, +1 703-527-3887
Icons in SDS
Company Information
company name
SABIC Innovative Plastics US LLC
e-mail address of the competent person responsible for the Safety Data Sheet
productinquiries@sabic-ip.com
Section 2
SECTION 2: Hazards identification
OSHA The additives in this product are bound in a thermoplastic resin matrix. In accordance with GHS for the classification of the product, the hazard potential may be assessed with respect to the physico-chemical form and/or bioavailability of the individual components in the thermoplastic resin. Where GHS classifications are shown below, these are based on the individual components in the thermoplastic resin matrix. Under the typical use conditions for the resin, these hazardous components are unlikely to contribute to workplace exposure. Please read the entire safety data sheet and/or consult an EHS professional for a complete understanding. Classification
2.2 Label elements
Emergency Overview Not classified The product contains no substances which at their given concentration, are considered to be hazardous to health Appearance: Pellets Physical State: Solid Odor: None or slight
2.3 Other hazards
Not applicable
Further information
Not applicable
Other hazards which do not result in classification
SABIC Emergency Overview • Pellets with slight or no odor • Spilled material may create slipping hazard • Can burn in a fire creating dense, toxic smoke • Molten plastic can cause severe thermal burns • Fumes produced during melt processing may cause eye, skin, and respiratory tract irritation. Severe over-exposure may result in nausea, headache, chills, and fever. See below for additional effects. • Secondary operations, such as grinding, sanding, or sawing can produce dust which may present an explosion or respiratory hazard.
Medical Conditions Generally Aggravated by Exposure
MEDICAL RESTRICTIONS: There are no known health effects aggravated by exposure to this product. However, certain sensitive individuals and individuals with respiratory impairments may be affected by exposure to components in the processing vapors.
2.1 Classification of the substance or mixture
OSHA Regulatory Status This product is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
