General Information
Revision date
2015-04-27
Product name
EXNL0159-100
Product name
EXNL0159-100
Identification on the label/Trade name
NORYL
CAS No.
25134-01-4]
1.2.1 Relevant identified uses
May be used to produce molded or extruded articles or as a component of other industrial products
Manufacturer Name
SABIC Innovative Plastics B.V
Emergency telephone
Bergen op Zoom +31(0)164-292911 (24/24
Icons in SDS
Company Information
company name
SABIC Innovative Plastics B.V
e-mail address of the competent person responsible for the Safety Data Sheet
webinquiries@sabic-ip.com
Section 2
SECTION 2: Hazards identification
Classification According to Directive 67/548/EEC or 1999/45/EC: The additives in this product are bound in a thermoplastic resin matrix. In accordance with GHS for the classification of the product, the hazard potential may be assessed with respect to the physico-chemical form and/or bioavailability of the individual components in the thermoplastic resin. Where GHS classifications are shown below, these are based on the individual components in the thermoplastic resin matrix. Under the typical use conditions for the resin, these hazardous components are unlikely to contribute to workplace exposure. Please read the entire safety data sheet and/or consult an EHS professional for a complete understanding.
Precautionary statements
No GHS specific Precautionary Statements required - observe all other warnings and handling instructions in this SDS.
Other hazards which do not result in classification
SABIC Emergency Overview • Pellets with slight or no odor • Spilled material may create slipping hazard • Can burn in a fire creating dense, toxic smoke • Molten plastic can cause severe thermal burns • Fumes produced during melt processing may cause eye, skin, and respiratory tract irritation. Severe over-exposure may result in nausea, headache, chills, and fever. See below for additional effects. • Secondary operations, such as grinding, sanding, or sawing can produce dust which may present an explosion or respiratory hazard.
Further information
Cool skin rapidly with cold water after contact with molten material. Heating can release hazardous gases. Hazardous fumes can also occur in post-processing operations. Processing Issues: Processing vapors may cause irritation to the eyes, skin, and respiratory tract. In cases of severe exposure, nausea and headache can also occur. Grease-like processing vapor condensates on ventilation ductwork, molds, and other surfaces can cause irritation and injury to skin.
Medical Conditions Generally Aggravated by Exposure
MEDICAL RESTRICTIONS: There are no known health effects aggravated by exposure to this product. However, certain sensitive individuals and individuals with respiratory impairments may be affected by exposure to components in the processing vapors.
