General Information
Version
9
Revision date
2012-02-21
Product name
XH6050-1000
Product name
XH6050-1000
Identification on the label/Trade name
EXTEM*
1.2.1 Relevant identified uses
May be used to produce molded or extruded articles or as a component of other industrial products
Manufacturer Name
SABIC Innovative Plastics
Emergency telephone
Bergen op Zoom +31(0)164-292911 (24/24
Icons in SDS
Company Information
company name
SABIC Innovative Plastics B.V
e-mail address of the competent person responsible for the Safety Data Sheet
webinquiries@sabic-ip.com
Section 2
SECTION 2: Hazards identification
EMERGENCY OVERVIEW: • Pellets with slight or no odor • Spilled material may create slipping hazard • Can burn in a fire creating dense, toxic smoke • Molten plastic can cause severe thermal burns • Fumes produced during melt processing may cause eye, skin, and respiratory tract irritation. Severe over-exposure may result in nausea, headache, chills, and fever. See below for additional effects. • Secondary operations, such as grinding, sanding, or sawing can produce dust which may present an explosion or respiratory hazard. Skin Contact: Not a hazard with pellets during normal industrial use. Eye Contact: Resin particles, like other inert materials, are mechanically irritating to eyes. Inhalation: Pellet inhalation unlikely due to physical form. Ingestion: Pellet ingestion unlikely due to physical form.
