Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
5-10
EC/CAS
1333-86-4
Name of the chemical
carbon black
Concentration
0.1-1.0
General Information
Version
0
Revision date
2014-03-13
Product name
EXRL2145-EXPTL
1.2.1 Relevant identified uses
May be used to produce molded or extruded articles or as a component of other industrial products
Manufacturer Name
SABIC Innovative Plastics B.V
Emergency telephone
800/447-4545
Icons in SDS
Company Information
company name
SABIC Innovative Plastics B.V
e-mail address of the competent person responsible for the Safety Data Sheet
productinquiries@sabic-ip.com, webinquiries@sabic-ip.com
Section 2
SECTION 2: Hazards identification
EMERGENCY OVERVIEW: • Pellets with slight or no odor • Spilled material may create slipping hazard • Can burn in a fire creating dense, toxic smoke • Molten plastic can cause severe thermal burns • Fumes produced during melt processing may cause eye, skin, and respiratory tract irritation. Severe over-exposure may result in nausea, headache, chills, and fever. See below for additional effects. • Secondary operations, such as grinding, sanding, or sawing can produce dust which may present an explosion or respiratory hazard.
HMIS® ratings
Health: 0 Flammability: 1 Reactivity: 0 Skin Contact: Not a hazard with pellets during normal industrial use. Eye Contact: Resin particles, like other inert materials, are mechanically irritating to eyes. Inhalation: Pellet inhalation unlikely due to physical form. Ingestion: Pellet ingestion unlikely due to physical form. Sensitization: No information available on this product
Further information
Cool skin rapidly with cold water after contact with molten material. Heating can release hazardous gases. Hazardous fumes can also occur in post-processing operations. Chronic/Carcinogenic Information Chronic Toxicity: No information available Processing Issues: Processing vapors may cause irritation to the eyes, skin, and respiratory tract. In cases of severe exposure, nausea and headache can also occur. Grease-like processing vapor condensates on ventilation ductwork, molds, and other surfaces can cause irritation and injury to skin.
Medical Conditions Generally Aggravated by Exposure
MEDICAL RESTRICTIONS: There are no known health effects aggravated by exposure to this product. However, certain sensitive individuals and individuals with respiratory impairments may be affected by exposure to components in the processing vapors.
