Note: Ingredients listed on restricted chemical lists
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
>=0.3-<1
General Information
Version
1.0
Revision date
2024-03-28
Product name
3413HF-73558
Product name
3413HF-73558
Identification on the label/Trade name
LEXAN resin
1.2.1 Relevant identified uses
May be used to produce molded or extruded articles or as a component of other industrial products
supplier name
SABIC Innovative Plastics B.V
Emergency telephone
(800) 424-9300, +1 (703) 527-3887
Icons in SDS
Company Information
company name
SABIC Innovative Plastics B.V
e-mail address of the competent person responsible for the Safety Data Sheet
sds.info@sabic.com
Section 2
SECTION 2: Hazards identification
OSHA GHS Remark The additives in this product (if any) are bound in a thermoplastic resin matrix. In accordance with GHS for the
2.1 Classification of the substance or mixture
Classification (REGULATION (EC) No 1272/2008) Not a hazardous substance or mixture.
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
ECOLOGICAL INFORMATION
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
TOXICOLOGICAL INFORMATION
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
Other hazards which do not result in classification
SABIC Emergency Overview Pellets with slight or no odor Spilled material may create slipping hazard. Can burn in a fire creating dense, toxic smoke Molten plastic can cause severe thermal burns Fumes produced during melt processing may cause eye, skin, and respiratory tract irritation. Severe over-exposure may result in nausea, headache, chills, and fever. Secondary operations, such as grinding, sanding, or sawing can produce dust which may present an explosion or respiratory hazard.
Medical Conditions Generally Aggravated by Exposure
MEDICAL RESTRICTIONS: There are no known health effects aggravated by exposure to this product. However, certain sensitive individuals and individuals with respiratory impairments may be affected by exposure to components in the processing vapors.
