“BLO

Appearance/Odor

REFER TO PRODUCT BULLETIN. Saimeesesooses==== SECTION IV - FIRE AND EXPLOSION HAZARD DATA ==s=s===s====s== FLASH POINT: 315 F METHOD USED: PMCC FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: N/A UPPER: N/A EXTINGUISHING MEDIA: CARBON DIOXIDE, FOAM OR DRY CHEMICAL. Page: 2 SPECIAL FIREFIGHTING PROCEDURES WHEN FIRE FIGHTING, WEAR FULL PROTECTIVE BQUIPMENT INCLUDING SELF-CONTAINED BREATHING APPARATUS. UNUSUAL FIRE AND EXPLOSION HAZARDS NONE. pucseesssemessssosssoscese= SECTION V - REACTIVITY DATA =s=sssssossssso===2==<5== STABILITY: STABLE CONDITIONS TO AVOID EXCESSIVE HEAT. INCOMPATIBILITY (MATERIALS TO AVOID) STRONG ACIDS, AMINES, MERCAPTANS AND BASES. HAZARDOUS DECOMPOSITION OR BYPRODUCTS CARBON MONOXIDE, CARBON DIOXIDE, PHENOLICS. HAZARDOUS POLYMERIZATION: { ] MAY OCCUR [X] WILL NOT OCCUR SoseseSssesssssS=ss=== SECTION VI -

Health hazards

DATA = ======S=s===S=sS2s2==s==SS=>= INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE MOST EPOXY RESINS DO NOT POSE AN INHALATION RISK. SOME EPOXY RESINS MAY HAVE COMPONENTS WHICH MAY CAUSE RESPIRATORY TRACT IRRITATION IF INHALED. SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE MATERIAL MAY BE IRRITATING TO EYES AND SKIN. MAY CAUSE RASH OR DERMITITIS. SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE SKIN ABSORPTION MAY BE HARMFUL. MAY CAUSE RASH, ITCHING OR DERMITITIS. INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE MAY CAUSE IRRITATION OF THE MOUTH, THROAT AND GASTROINTESTINAL TRACT. THIS MAY CAUSE NAUSEA AND DIARRHEA. (ACUTE AND CHRONIC) THIS PRODUCT MAY BE IRRITATING TO SKIN CAUSING A RASH OR DERMITITIS. THIS PRODUCT MAY CAUSE SENSITIZATION.

Medical Conditions Generally Aggravated by Exposure

SKIN DISORDERS AND ALLERGIES. EMERGENCY AND FIRST AID PROCEDURES IN CASE OF CONTACT, REMOVE CONTAMINATED CLOTHING AND FLUSH SKIN OR EYES WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. SERK MEDICAL ATTENTION FOR EYES. IF INHALED, MOVE VICTIM TO FRESH AIR, IF SWALLOWED, CALL PHYSICIAN IMMEDIATELY. WASH CONTAMINATED CLOTHING BEFORE REUSE. Page: 3 Sessssss=== SECTION VII -

Precautionary statements

FOR SAFE HANDLING AND USK ==s=s===5===== STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED ABSORB WITH INERT MATERIAL, SWEEP OR SCOOP UP AND PUT IN DISPOSAL CONTAINER. WASTE DISPOSAL METHOD INCINERATE OR BURY IN LANDFILL IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS. INCINERATION IS THE PREFERRED METHOD OF DISPOSAL. TO BE TAKEN IN HANDLING AND STORING AVOID CONTACT WITH EYES, SKIN OR CLOTHING. KEEP AWAY FROM FOOD AND DRINK. KEEP DRY AND STORE IN CLOSED CONTAINERS. OTHER PRECAUTIONS THIS MATERIAL CONTAINS BOILED LINSEED OIL. BOILED LINSEED OIL CONTAMINATED MATERIALS CAN SPONTANEOUSLY COMBUST IF STORED OR DISPOSED OF IMPROPERLY. RAGS OR WASTE CONTAMINATED WITH BOILED LINSEED OIL SHOULD BE STORED IN A METAL PAIL WITH LID, PREFERABLY SOAKED IN WATER. Gmesemessssesss=s==== SECTION VIII - CONTROL MEASURES ===========<=c====s=5= EPIC RESINS GIVES ALL INFORMATION HEREIN CONTAINED IN GOOD FAITH. DUE TO DIFFERENT APPLICATIONS, THE END USER SHOULD MAKE THE FINAL DETERMINATION AS TO THE PROPER EQUIPMENT AND CONTROLS TO BE USED WITH THIS PRODUCT. RESPIRATORY PROTECTION MOST EPOXY RESINS WILL NOT NEED A RESPIRATOR, HOWEVER, USE AN ORGANIC VAPOR RESPIRATOR IF VENTILATION IS INADEQUATE. VENTILATION FORCED AIR. PROTECTIVE GLOVES NEOPRENE OR NITRILE RUBBER. EYE PROTECTION GLASSES WITH SIDE SHIELDS, CHEMICAL SPLASH GOGGLES AND/OR FACE SHIELD. OTHER PROTECTIVE CLOTHING OR EQUIPMENT IMPERVIOUS APRON, SAFETY SHOWER AND EYE WASH STATION. WORK/HYGIENIC PRACTICES WASH AT THE END OF BACH WORKSHIFT AND BEFORE EATING, DRINKING, SMOKING OR USING THE RESTROOM. PROMPTLY REMOVE CLOTHING THAT BECOMES CONTAMINATED. EXAMINE PROTECTIVE GLOVES BEFORE USING. LAUNDER OR PROPERLY DISPOSE CONTAMINATED CLOTHING ARTICLES. SECTION IX - OTHER INFORMATION === COLD ROOM Page: THE INFORMATION HEREIN IS GIVEN IN GOOD FAITH, BUT NO WARRANTY EXPRESSED OR IMPLIED IS MADE. EPEC RESINS URGES USERS OF THIS PRODUCT TO EVALUATE ITS SUITABILITY AND COMPLIANCE WITH LOCAL REGULATIONS AS EPIC RESINS CANNOT FORESEE THE FINAL USE OF THE PRODUCT, NOR THE FINAL LOCATION