General Information
Version
4
Revision date
2024-01-16
Product name
A-LINK EE
1.2.1 Relevant identified uses
Dental product
Emergency telephone
++49 4121 483-0
Icons in SDS
Company Information
company name
S&C Polymer Silicon- und Composite Spezialitäten GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
info@sc-polymer.de
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H319, H336
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Classification
2.2 Label elements
Labeling
Signal word
Danger
Hazard statements
H225 Highly flammable liquid and vapour H319 Causes serious eye irritation H336 May cause drowsiness or dizziness
Precautionary statements
P210 Keep away from heat/sparks/opem flames/hot surfaces. – No smoking. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Labeling according to EU guidelines: Medical devices as defined in Directive 93/42/EEC and which are invasive or used in direct physical contact with the human body; are exempted from the provisions of Regulation (EC) No.
PBT Substances
not applicable
vPvB Substances
not applicable 8. Exposure controls/personal protection Components with limits of values to be supervised at the workplace: CAS-No. name art value unit [141-78-6] Ethylacetate TRGS900 400 ml/m3 or 1500 mg/m3
Additional information
The lists valid during the making were used as basis Personal protective equipment: General protective and hygienic measures: The usual precautionary measures are to be adhered to when handling chemicals. Keep away from foodstuffs and beverages. Avoid contact with eyes or skin Hand protection Protective gloves. Due to missing tests no recommendation to the glove material can be given for the product. Eye protection: safety glasses Respiratory protection: Required, when aerosols are generated 9. Physical and chemical properties Information on basic physical and chemical properties Appearance Form: liquid Color: slightly yellow Odor: sweetish Value Unit Method Safety relevant basic data Melting point/melting range: n.a. Boiling point/boiling range: approx. 77 °C Flash point: -4 °C DIN 51755 Ignition temperature: No information available Danger of explosion: Lower limit of explosion 2.1 Vol% Kühn- Upper limit of explosion 11.5 Vol% Birett Density: ca. 0,93 (20°C) g/cm3 Vapor pressure: n.d. Solubility in/miscibility with: Water: soluble Content of solvents: Organic solvents: ethylacetate 10. Stability and reactivity Thermal decomposition / conditions to be avoided Possibility of hazardous reactions: no information available Conditions to avoid: Heat, direct sunlight and radical starters. The product is stable by proper use. Avoid contact with alkali metals, hydrids, strong oxidizing agents, radical intitiators. Hazardous decomposition products: No information available.
TOXICOLOGICAL INFORMATION
Acute toxicity: (ethylacetate) LD50 (oral, rat) 5600 mg/kg LD50 (dermal, rabbit) >18000 mg/kg LD50 (inhal., rat) 5,86 mg/l (8h) Primary irritation: skin: repeated exposure may cause skin dryness or cracking eye: strong irritating effect Inhalation and swallowing: irritation of mucous membranes, loss of appetite, headache, drowsiness Additional toxicological information: Allergic reactions to acrylates after long-term exposure are possible. When used and handled according to specifications, the product does not have any harmful effects to our experience and the information provided to us. 12. Ecological information