Professional / High Performance Enamel Spray Paint - Metallic Coating

Hazard statements (CLP)

H222, H280, H317, H319, H336, H340, H350, H361, H372

Code

Statements

H222

Extremely flammable aerosol

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Danger Possible Hazards 30% of the mixture consists of ingredient(s) of unknown acute toxicity. GHS HAZARD STATEMENTS Carcinogenicity, category 1B H350 May cause cancer. Eye Irritation, category 2A H319 Causes serious eye irritation. Flammable Aerosol, category 1 H222 Extremely flammable aerosol. Gases under Pressure; Compressed Gas ~ H280 Contains gas under pressure; may explode if heated. Germ Cell Mutagenicity, category 18 H340 May cause genetic defects. Reproductive Toxicity, category 2 H361 Suspected of damaging fertility or the unborn child. Skin Sensitizer, category 1 H317 May cause an allergic skin reaction. STOT, Repeated Exposure, category 1 H372 Causes damage to organs through prolonged or repeated exposure. STOT, Single Exposure, category 3, NE H336 May cause drowsiness or dizziness. GHS LABEL PRECAUTIONARY STATEMENTS P201

Signal word

Danger 30% of the mixture consists of ingredient(s) of unknown acute toxicity.

Hazard statements

Carcinogenicity, category 1B Eye Irritation, category 2A Flammable Aerosol, category 1 Gases under Pressure; Compressed Gas ~ Germ Cell Mutagenicity, category 18 Reproductive Toxicity, category 2 Skin Sensitizer, category 1 STOT, Repeated Exposure, category 1 STOT, Single Exposure, category 3, NE H350 May cause cancer. H319 Causes serious eye irritation. H222 Extremely flammable aerosol. H280 Contains gas under pressure; may explode if heated. H340 May cause genetic defects. H361 Suspected of damaging fertility or the unborn child. H317 May cause an allergic skin reaction. H372 Causes damage to organs through prolonged or repeated exposure. H336 May cause drowsiness or dizziness.

Precautionary statements

P201 Obtain special instructions before use. P203 Obtain, read, and follow all safety instructions before use. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. Professional / High Performance Enamel Spray Paint - Metallic Coating P260 Do not breathe dust/fumes/gas/mistivapours/spray. P264 Wash thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves / protective clothing / eye protection / face protection. P302+P352 IF ON SKIN: Wash with plenty of soap and water. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concemed: Get medical advice/attention. P308+P316 IF exposed or concemed: Get emergency medical help immediately. P317 Get medical help. P319 Get medical help if you fell unwell. P321 Specific treatment (see notice on this label). P333+P317 If skin iritation or rash occurs: Get medical help. P337+P317 If eye iitation persists: Get medical help. P362+P364 Take off contaminated clothing and wash it before reuse. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up. P410+P403 Protect from sunlight. Store in a well-ventilated place. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C / 122°F. P501 Dispose of contents and container in accordance with local, regional and national regulations. P270 Do not eat, drink or smoke when using this product.