Rust Dissolve

Hazard statements (CLP)

H227, H290

Code

Statements

H227

Combustible liquid

SECTION 2: Hazards identification

Hazard pictograms

Corrosive, Harmful by Inhalation, Combustible Liquid

Signal word

Danger Skin Corrosion (Category 1C) Serious Eye Damage (Category 1) Specific Target Organ Toxicity - Single Exposure (Category 1) Specific Target Organ Toxicity — Repeated or Prolonged Exposure (Category 1) Corrosive to Metals (Category 1) Flammable Liquid (Category 4)

Hazard statements

Causes severe skin bums and serious eye damage. Causes damage to lungs by breathing vapors. Causes damage to teeth through prolonged or repeat exposure by breathing vapors. May be corrosive to metals. Combustible liquid. Precautionary Do not breathe fumes, gas, mist, vapors or spray. Wash hands thoroughly after handling. ‘Wear protective gloves and clothing. Wear eye and face protection. Do not eat, drink or smoke when using this product. Keep only in original container. Use only outdoors or in a well- ventilated area. Keep away from flames and hot surfaces. — No smoking. If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Wash contaminated clothing before reuse. If inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call a poison control center or physician. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison control center or physician. If exposed or feel unwell: Call a poison control center or physician. Absorb spillage to prevent material damage. In case of fire: Use carbon dioxide or dry chemical to extinguish. Store locked up in corrosive resistant container with a resistant inner liner. Store in a well- ventilated area. Dispose of contents and containers in accordance with local, regional and national regulations. Product Code: 06 RD Snee Chemical — Rust Dissolve version date 2/28/22 Tof7 3. COMPOSITION/INFORMATION ON HAZARD INGREDIENTS Ingredient Name CAS Number | Percent OSHA, PEL ACGIH, TLV Phosphoric Acid 7664-38-2 10 | 1 mg/m} (TWA) 1 mg/m’ (TWA) Hydrochloric Acid 7647-01-0 5 ppm (Ceiling) 2 ppm (Ceiling) Ethylene Glycol Monobutyl Ether 111-76-2 <1 50 ppm 8 hrs TWA. 20 ppm 8 hrs/ TWA. Zinc Chloride 7646-85-7 1-5 1 mg/m’* (TWA) 1 mg/m’ (TWA)