Note: Ingredients listed on restricted chemical lists
EC/CAS
96-29-7
Name of the chemical
2-Butanonoxim (2020/1182)
Concentration
N/A
General Information
Revision date
2016-11-30
Product name
NEW COAT HIGH TEMPERATURE PAINT
1.2.1 Relevant identified uses
High temperature paint
Emergency telephone
0405358685
Icons in SDS
Company Information
company name
Rubbedin Pty Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
info@rubbedin.com.au
GHS Information
Signal word
WARNING
Section 2
2.1 Classification of the substance or mixture
SUSMP Poisons Schedule This product is classified as a Scheduled 5 Poison according to the SUSMP Dangerous Goods This product is classified as Dangerous Goods according to the Australian Dangerous Goods (ADG) Code. Flammable Liquid – Category 3 Specific target organ toxicity (Single exposure) – Category 3 Skin sensitization – Category 1A
Hazard pictograms
Flame, Excalmation Mark
Signal word
WARNING
Hazard statements
Flammable liquid and vapour. May be harmful if swallowed. May cause an allergic skin reaction. May cause drowsiness or dizziness. May cause respiratory irritation.
Precautionary statements
Keep out of reach of children.
Prevention
Read label before use. Keep away from heat, sparks, open flames, hot surfaces – No smoking. Keep container tightly closed. Ground container and receiving equipment. Use explosion-proof equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Avoid breathing mist/vapours/spray. Use only outdoors or in a well-ventilated area. Wear protective clothing, gloves, eye/face protection and suitable respirator as required. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.
Response
IF ON SKIN (or hair): Remove immediately all contaminated clothing. Wash with plenty of soap and water. Call a POISON CENTRE or doctor if you feel unwell. Wash contaminated clothing before reuse. If skin irritation occurs get medical attention. If medical advice is needed have product container or label on hand. In case of fire: Use alcohol resistant foam for extinction. Collect spillage.
Storage
Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up.
Disposal
Dispose of contents/container in accordance with local regulations. Note IMPORTANT This SDS and the Hazard Classifications contained therein, only apply to the product in its concentrated form, as supplied. Good hygiene and housekeeping practices should be adhered to. SECTION 3 – INGREDIENTS Ingredients: CAS Number: Proportion: Alkyd resin Various 30 - 40 Mineral turpentine 64742-88-7 30 - 40 Methyl Ethyl Ketoxime 96-29-7 < 1 Aluminium Powder 7429-90-5 <1 NOTE: Ingredients determined not to be hazardous are present in concentrations that do not exceed the relevant cut-off concentrations as found from NOHSC publication “List of Designated Hazardous Substances” or have been found NOT to meet the criteria of a hazardous substance as defined in the NOHSC publication “Approved Criteria for Classifying Hazardous Substances”, or have been found NOT to meet the criteria of a dangerous substance as defined in the GLOBALLY HARMONIZED SYSTEM OF CLASSIFICATION AND LABELLING OF CHEMICALS (GHS) , 4th edition United Nations 2011. Listed ingredients may be below the cut-off concentrations for classification as hazardous, but are listed for information purposes and for additive effects.