BLACK PATCH STOVE PUTTY

SECTION 2: Hazards identification

GHS Classification GHS - GLOBALLY HARMONISED SYSTEM

2.1 Classification of the substance or mixture

Not hazardous

Hazard pictograms

None allocated.

Signal word

None allocated.

Hazard statements

None allocated.

Prevention

None allocated.

Response

None allocated.

Storage

None allocated.

Disposal

None allocated. ADG CODE

UN Number

none allocated

ADG classification

none allocated Shipping Name none allocated ADG Subsidiary Risk none allocated Hazchem Code none allocated Packing Group none allocated POISON SCHEDULES

SUSMP Classification

Not scheduled EMERGENCY OVERVIEW Colour black Odour none Physical Description putty Viscosity putty

Health hazards

None known SECTION 3 – INGREDIENTS Ingredients determined not to be hazardous are present in concentrations that do not exceed the relevant cut-off concentrations as found from NOHSC publication “List of Designated Hazardous Substances” or have been found NOT to meet the criteria of a hazardous substance as defined in the NOHSC publication “Approved Criteria for Classifying Hazardous Substances”. Ingredients: CAS Number: Proportion: Exposure Standards TWA Standards STEL Ingredients determined Various >60% w/w not set to be non-hazardous Water 7732-18-5 <10% w/w not set Silica Quartz Sand 14808-60-7 10 - 30% w/w 0.1 mg/m3 not set Cristobalite 14464-46-1 (respirable dust) The TWA exposure value is the Time Weighted Average airborne concentration of a particular substance when calculated over a normal 8 hour working day for a 5 day working week. The STEL (Short Term Exposure Limit) is an exposure value that should not be exceeded for more than 15 minutes and should not be repeated for more than 4 times per day. There should be at least 60 minutes between successive exposures at the STEL. The term “peak” is used when the TWA limit, because of the rapid action of the substance, should never be exceeded, even briefly. BLACK PATCH PUTTY SDS GHS R1 2013 ISSUE DATE : JUNE 2013 Page 1 of 6