Mohawk SPOT REMOVER

RPM Wood Finishes Group

Revision date : 2017-06-05

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS04 GHS07 GHS08
Health risk rating 5
Safety risk rating 4
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

EC/CAS

109-66-0

Name of the chemical

pentane

Concentration

N/A

EC/CAS

75-37-6

Name of the chemical

1,1-Difluoroethane

Concentration

N/A

EC/CAS

107-46-0

Name of the chemical

Hexamethyldisiloxane

Concentration

N/A

Listed in

General Information

Revision date

2017-06-05

Product name

Mohawk SPOT REMOVER

supplier name

RPM Wood Finishes Group

Icons in SDS

Company Information

company name

RPM Wood Finishes Group

GHS Information

Signal word

DANGER

Section 2

SECTION 2: Hazards identification

DANGER

Hazard statements

Flammable aerosol, category 1 Extremely Flammable Aerosol Gas under pressure, dissolved Contains gas under pressure; may explode if heated Eye irritant, 2A Causes serious eye irritation

Aspiration hazard

category 1 May be fatal if swallowed and enters airways Keep away from heat, open flames, and hot surfaces. –No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Avoid breathing spray. Wash hands thoroughly after handling. Wear eye protection. Use only outdoors or in a well‐ventilated area. Dispose of container to a licensed waste disposal company. Protect from sunlight. Do not expose to temperatures exceeding 122°F (50°C). Store locked up in a well ventilated place. IF SWALLOWED Immediately call a POISON CONTROL CENTER. Do NOT induce vomiting. IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a doctor if you feel unwell. HMIS 1=SLIGHT HAZARD; Irritation or minor reversible injury M107-0505 possible 3=SERIOUS HAZARD; Materials capable of ignition under HEALTH 1 almost all normal temperature conditions. Includes flammable liquids with flash points below 73°F and FLAMMABILITY 3 boiling points above 100°F as well as liquids with flash

Physical hazards

2 points between 73°F and 100°F. (Classes IB & IC) PERSONAL PROTECTION A 2=Materials that are unstable and may undergo violent chemical changes at normal temperature and pressure with low risk for explosion. Materials may react violently with water or form peroxides upon exposure to air A= Safety Glasses

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.