Note: Ingredients listed on restricted chemical lists
EC/CAS
25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
N/A
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
General Information
Revision date
2009-10-08
Product name
Double Bubble Epoxy Wet Surface Patching Part A (04003)
Icons in SDS
Company Information
company name
Royal Adhesives And Sealants, LLC
Section 2
Hazard statements
Irritant Dangerous for the environment · Information pertaining to particular dangers for man and environment: Irritating to eyes and skin. May cause sensitisation by skin contact. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Contains epoxy constituents. See information supplied by the manufacturer.
Classification system
The classification was made according to the latest editions of international substances lists, and expanded upon from company and literature data. · NFPA ratings (scale 0 - 4) Health = 2 1 Fire = 1 2 0 Reactivity = 0 · HMIS-ratings (scale 0 - 4) HEALTH 2 Health = 2 FIRE 1 Fire = 1 PHYSICAL HAZARD 0 Physical Hazard = 0
2.2 Label elements
Exclamation mark Warning 3.2/2 - Causes skin irritation. 3.3/2A - Causes serious eye irritation. 3.4/1 - May cause an allergic skin reaction.
Environmental hazards
4.1/2 - Toxic to aquatic life with long lasting effects.
Prevention
Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection.
Response
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Specific treatment (see on this label). Take off contaminated clothing and wash before reuse.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations. *
