HIGHTEC NatSync GS 68

Supplemental label elements

According to EC directives or the corresponding national regulations the product does not have to be labelled.

2.3 Other hazards

No data available 3.2. Mixtures

Further information

According to EC directives or the corresponding national regulations the product does not have to be labelled. 4.1. Description of first aid measures General information Self-protection of the first aider Change contaminated clothing. Do not put any product-impregnated cleaning rags into your trouser pockets. After inhalation Provide fresh air. After contact with skin Wash with plenty of water. Change contaminated clothing. After contact with eyes Rinse immediately carefully and thoroughly with eye-bath or water. After ingestion Rinse mouth immediately and drink plenty of water. 4.3. indication of any immediate medical attention and special treatment needed Caution if victim vomits: Risk of aspiration! Solid content: 0 none 10.1. Reactivity No data available 10.2. Chemical stability No thermal decomposition if properly stored / handled /Aransported. Onset of decomposition at elevated temperatures 10.3. Possibility of hazardous reactions possible with strong oxidizing agents. This product is stable under norma! conditions. Hazardous reactions are unlikely. 10.4. Conditions to avoid No thermal decomposition if properly stored / handled /transported. 10.5. Incompatible materials Oxidizing agenis, strong. 10.6. Hazardous decomposition products hydrocarbons. Carbon monoxide. Carbon dioxide.

Aspiration hazard

Call a physician immediately §.1. Extinguishing media Suitabie extinguishing media Co-ordinate fire-fighting measures to the fire surroundings. Unsuitable extinguishing media High power water jet. 5.2. Special hazards arising from the substance or mixture The product itself does not burn. §.3. Advice for firefighters In case of fire: Wear self-contained breathing apparatus.

Additional information

Collect contaminated fire extinguishing water separately. Do not allow entering drains or surface water. 6.1. Personal precautions, protective equipment and emergency procedures Special danger of slipping by leaking/spilling product. Wear suitable protective clothing. Wear breathing apparatus if exposed to vapours/dusts/aerosols. 6.2. Environmental precautions Do not allow to enter into surface water or drains. 6.3. Methods and material for containment and cleaning up Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents). Treat the recovered material as prescribed in the section on waste disposal. 6.4. Reference to other sections In case of gas escape or of entry into waterways, soil or drains, inform the responsible authorities. 7.1. Precautions for safe handling Advice on safe handling Protect skin by using skin protective cream. Wash hands before breaks and after work. Conditions to avoid: aerosol or mist generation. Advice on protection against fire and explosion No special measures are necessary. When using do not smoke. Fire class B (DIN-/EN-Norms EN2) 7.2, Conditions for safe storage, including any incompatibilities Requirements for storage rooms and vessels Keep container tightly closed. Advice on storage compatibility Do not store together with:Food and fodder, Oxidizing agents. Further information on storage conditions lf product enters soil, it will be mobile and may contaminate groundwater. Keep away from heat. 8.1. Control parameters 8.2. Exposure controls Protective and hygiene measures Change contaminated clothing. Wash hands before breaks and after work. When using do not eat or drink. Eye/face protection In fine dispersion/spraying/misting: Wear eye/face protection. Hand protection Wear suitable gloves. Skin protection In fine dispersion/spraying/misting: Wear protective gloves/protective clothing. Respiratory protection Wear breathing apparatus if exposed to vapours/dusts/aerosois. 9.1. Information on basic physical and chemical properties Physical state: liquid Colour: brown Odour: characteristic Test method pH-Value: not applicable DIN 51369 Changes in the physical state Pourpoint:: ~-21°C DIN ISO 3016 Flash point: >200°C DIN ISO 2592 Explosive properties not explosive. Ignition temperature: No data available Vapour pressure: >0,i hPa calculated. (at 20 °C) Density (at 15 °C): 0,92 g/cm? DIN 51757 Water solubility: practically insoluble (at 20 °C) , Solubility in other solvents Soluble in hydrocarbons (mineral oil.) Viscosity / dynamic: OmPa:s (at 0 °C) Viscosity / kinematic: ~75 mm7/s_ DIN 51562 (at 40 °C) Flow time: Os (at 0 °C) Solvent separation test: No data available Solvent content: none Solvents

2.1 Classification of the substance or mixture

This mixture is not classified as hazardous according to Directive 1999/45/EC.