Note: Ingredients listed on restricted chemical lists
EC/CAS
106-97-8
Name of the chemical
n-Butan, enthält 0,1% Butadien
Concentration
N/A
EC/CAS
75-28-5
Name of the chemical
iso-Butan, enthält 0,1% Butadien
Concentration
N/A
EC/CAS
203-448-7
Name of the chemical
n-Butan, enthält 0,1% Butadien
Concentration
N/A
EC/CAS
200-857-2
Name of the chemical
iso-Butan, enthält 0,1% Butadien
Concentration
N/A
General Information
Revision date
2009-09-25
Product name
MAXIGAS 400
1.2.1 Relevant identified uses
Burning gas
Icons in SDS
Company Information
company name
ROTHENBERGER Werkzeuge GmbH
GHS Information
Signal word
Warning!
Section 2
Hazard statements
Xi Irritant; F+ Extremely flammable Information concerning particular hazards for human and environment: The product has to be labelled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest valid version. Warning! Pressurized container. R 12 Extremely flammable. R 36 Irritating to eyes. R 66 Repeated exposure may cause skin dryness or cracking. R 67 Vapours may cause drowsiness and dizziness. Pressurized container: Protect from direct sunlight and do not expose to temperatures exceeding 50°C. Do not puncture/pierce or incinerate, even after use. Keep container in a well-ventilated place. Keep away from sources of ignition-No smoking. Keep out of the reach of children.
Classification system
The classification is according to the latest editions of the EU-lists, and extended by company and literature data.
Additional information
Flammable liquefied gas cartridge equipped with valve type 1 according EN 417. This cartridge complies with EN417. This cartridge shall only be used with ROTHENBERGER propane/butane appliances or other propane/butane appliances suitable for valves of type 1 according EN 417. Follow the instructions for use supplied with the appliance. Changing the cartridge: perform this operation in a well ventilated area, free from ignition sources. Close the appliance valve. Remove the appliance from the cartridge. Replace the connection seal if it is damaged or lost. Avoid cross-threading. Screw down hand tight only. WARNING: DO NOT REFILL!
