Note: Ingredients listed on restricted chemical lists
EC/CAS
231-111-4/7440-02-0
Name of the chemical
Nickel
Concentration
≤30
EC/CAS
231-158-0/7440-48-4
Name of the chemical
Cobalt, Metall (2020/217)
Concentration
≤0,5
General Information
Revision date
2019-02-26
Product name
Stainless steels for general and welding applications
Product name
Stainless steels for general and welding applications
Identification on the label/Trade name
RODACCIAI SpA
1.2.1 Relevant identified uses
Stainless steels for general and welding applications
Emergency telephone
+39 031878111
Icons in SDS
Company Information
company name
RODACCIAI SpA
e-mail address of the competent person responsible for the Safety Data Sheet
matteo.passavanti@rodacciai.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H351, H372
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
H351
Suspected of causing cancer
H372
Causes damage to organs through prolonged or repeated exposure
Section 2
SECTION 2: Hazards identification
Hazard labelling pursuant to EC Regulation 1272/2008 (CLP) and subsequent amendments and supplements. Under normal conditions, steel in solid form does not present any danger for health and safety. The possible formation of vapors or dust during working processes of the material may increase the risk of inhalation and skin contact with hazardous substances. Treatments that subject steel to thermal or mechanical stresses may involve the formation of inhalable fumes / vapors or dusts. Short-term exposure to fumes or steel dust generated during thermal and mechanical treatment processes may produce irritation to the eyes and respiratory system. Chronic inhalation of high concentrations of dust or fumes during thermal and mechanical treatment processes can cause siderosis. Inhalation of high concentrations of ferric oxides during thermal and mechanical treatment processes may have a synergistic effect and increase the long-term risk of developing lung cancer. Long exposure to Nickel vapors and its compounds during thermal and mechanical treatment processes can cause dermal sensitization, inflammation and ulcers in the respiratory tract and cancer. See section 8 of this sheet for more information on individual exposure.
2.1 Classification of the substance or mixture
The product is classified as hazardous pursuant to the provisions set forth in EC Regulation
2.2 Label elements
Hazard labelling pursuant to EC Regulation
Signal word
Danger
Hazard statements
H351 Suspected of causing cancer. H372 Causes damage to organs through prolonged or repeated exposure. H317 May cause an allergic skin reaction. EUH208
Contains
Cobalto May produce an allergic reaction. NICKEL
Precautionary statements
P201 Obtain special instructions before use. P261 Avoid breathing dust / fume / gas / mist / vapours / spray. P280 Wear protective gloves / clothing and eye / face protection. P308+P313 IF exposed or concerned: Get medical advice / attention. P362+P364 Take off contaminated clothing and wash it before reuse.