Note: Ingredients listed on restricted chemical lists
EC/CAS
270-704-2/68476-85-7
Name of the chemical
Petroleum gases, liquefied
Concentration
≥70
EC/CAS
200-662-2/67-64-1
Name of the chemical
acetone
Concentration
15 - 30
EC/CAS
200-661-7/67-63-0
Name of the chemical
Propan-2-ol
Concentration
2.4 - 5
EC/CAS
203-450-8
Name of the chemical
1,3-Butadien
Concentration
0,1 %
General Information
Version
8.1
Revision date
2022-05-20
Product name
MOULD RELEASE Spray
1.2.1 Relevant identified uses
Industrial use,Professional use Industrial/Professional use spec
1.2.2. Uses advised against
Acetone is listed as a reportable explosives precursor in Annex II of EU regulation 2019/1148
Manufacturer Name
ROCOL a division of ITW Ltd
Emergency telephone
+44 (0)113 232 2600, 0344 892 0111
Icons in SDS
Company Information
company name
ROCOL a division of ITW Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
customer.service@rocol.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H229, H319
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
SECTION 2: Hazards identification
Adverse physicochemical, human health and environmental effects
No additional information available
2.2 Label elements
Labelling
Hazard pictograms
GHS02 GHS07
Signal word
: Danger
Hazard statements
: H222 - Extremely flammable aerosol. H229 - Pressurised container: May burst if heated. H319 - Causes serious eye irritation.
Precautionary statements
: P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 - Do not spray on an open flame or other ignition source. P251 - Do not pierce or burn, even after use. P271 - Use only outdoors or in a well-ventilated area. P280 - Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. P270 - Do not eat, drink or smoke when using this product.
Supplemental label elements
: EUH066 - Repeated exposure may cause skin dryness or cracking.
Other hazards which do not result in classification
: On combustion or on thermal decomposition (pyrolysis) releases : Hazardous decomposition products. Inhalation of fumes may cause polymer fume fever. Contains no PBT/vPvB substances ≥ 0.1% assessed in accordance with REACH Annex XIII The mixture does not contain substance(s) included in the list established in accordance with Article 59(1) of REACH for having endocrine disrupting properties, or is not identified as having endocrine disrupting properties in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at a concentration equal to or greater than 0,1 % Component HYDROCARBON AEROSOL PROPELLANT (<0.1% The mixture does not contain substance(s) included in the list established in accordance 1,3-BUTADIENE)(68476-85-7) with Article 59(1) of REACH for having endocrine disrupting properties, or is not identified as having endocrine disrupting properties in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at a concentration equal to or greater than 0,1 %
