ROCKSTAR ANTI-SLIP

SECTION 2: Hazards identification

Classified as Hazardous according to criteria of Safe Work Australia and Dangerous Goods according to the ADG Code. This material is classified as corrosive (c) and harmful (xn) according to the criteria of Worksafe Australia. R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed. R34 - Causes burns. R41 - Risk of serious damage to eyes. R43 - May cause sensitisation by skin contact. S7/9 - Keep container tightly closed and in a well ventilated place. S23 - Do not breathe vapour. S26 - In case of contact with eyes, rinse immediately with plenty of water and contact a doctor or poisons information centre. S27 - Take off immediately all contaminated clothing. S28 - After contact with skin, wash immediately under running water for 15 minutes, and then apply calcium gluconate gel. Seek immediate medical advice (show label whenever possible). S37/39 - Wear suitable gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) UN NO…...: 2922 D.G. Class.: 8 Pack. Group…: II HAZCHEM: 2X SUB. RISK.: 6.1 SUSDP 6 PROPER SHIPPING NAME: Corrosive Liquids N.O.S. (Contains 6.8% W/W Nitric Acid And 6% W/W Ammonium Bifluoride)

Potential health effects

ACUTE: Ingestion - Harmful if swallowed. This material will cause burns to the mouth, oesophagus and gastrointestinal tract. Skin - Contact with skin may result in painful burns which may not become evident until some time after exposure. May cause skin sensitisation. Eyes - Liquid contact with the eyes can cause severe burns which may result in serious eye damage or even blindness. Inhalation - Inhalation of vapour or mist may cause ulcers of the upper respiratory tract. Chronic - Skin burns are slow to heal after penetration of the epidermis. Corrosive fluorides can attack bone calcium through the skin and cause intense pain. As with any industrial chemical, ingestion, inhalation of vapour or mist, prolonged or repeated skin contact should be avoided by good standards of industrial hygiene.