ELECTRA PLUS BARS

Hazard statements (CLP)

H333

Code

Statements

H333

May be harmful if inhaled

SECTION 2: Hazards identification

OSHA Hazards Emergency Overview: Solid metallic products are generally classified as "articles" and do not constitute hazardous materials

Precautionary statements

BURNING ELECTRA PLUS BARS CAUSES FUMES TO BE RELEASED. MAY BE HARMFUL IF INHALED. MAY IRRITATE THE EYES, SKIN, AND RESPIRATORY TRACT. MOLTEN MATERIAL MAY CAUSE THERMAL BURNS. Elevated temperature processing (such as burning and cutting) may release hazardous fumes. Overexposure to metal fumes may cause pulmonary edema (fluid in the lungs) and methemaglobinemia. May also cause pulmonary fibrosis and lung cancer. Lead compounds may be absorbed by ingestion, by inhalation and through the skin. Lead may damage kidney function, the blood forming system and the reproductive system. Inorganic lead compounds can cause developmental damage. Sparks and fumes from burning metal are produced when operating an exothermic torch. Inhalation of fumes may cause metal-fume fever. Avoid breathing dust/fume/gas/mist/vapors/spray Wear protective gloves/protective clothing/eye protection In case of contact with eyes, rinse immediately with plenty of water and seek medical attention In case of insufficient ventilation, wear suitable respiratory equipment Avoid surrounding combustibles (Burning cutting rod generates sparks) Sparks, splatter and molten material generated by this process can cause fire, severe property damage, and bodily injury. Arc rays (UV) and splatter can injure eyes and exposed skin. Always wear proper eye protection with appropriate shade (typically No. 5 or 6) filter. Coatings and residue may irritate skin and eyes. Wash hands thoroughly with soap and water after handling.

Medical Conditions Generally Aggravated by Exposure

Allergies, skin disorders, respiratory disorders, central nervous system, pre-existing eye disorders, blood disorders, kidney disorders, liver disorders, nasal cavities, and lungs. Page: 3 of 12

2.1 Classification of the substance or mixture

Hazard Statements: When the cutting rods are consumed in the normal course of work using an exothermic torch (oxygen lance) airborne metal fumes are produced that include: TLV PEL Mg/M3 Mg/M3 Copper Fume 0.2 0.1 Iron Oxide Fume 5.0 5.0 Lead Fume 0.05 0.03 Manganese Fume 0.1 5.0 Nickel Fume 0.015 1.0 Fumes from the material being cut (*Know the target material and the possible by-products).