General Information
Revision date
2006-04-03
Product name
Maxsyn SLF
1.2.1 Relevant identified uses
Water-extendable metalworking fluid/lubricant concentrate which is normally to be diluted in water prior to use (typical dilutions 3 - 10% in water). Refer to the supplier for further advice on suitability and dilution recommendations for specific applications
supplier name
Rock Oil Company
Emergency telephone
(44) 01925 636191, +44 (0)1235 239 670
Icons in SDS
Company Information
company name
Rock Oil Company
e-mail address of the competent person responsible for the Safety Data Sheet
sales@rockoil.co.uk
Section 2
SECTION 2: Hazards identification
This product is classified as Dangerous for Supply according to EC Dangerous Substances/Preparations Directives - Xi: Skin and Eye Irritant Health and Safety The undiluted product is strongly irritating in the eye with a potential to cause corneal injury if treatment is not prompt. In contact with the skin, the undiluted product may cause irritation which could become more intense if not promptly removed or if contact is frequent or prolonged. Prolonged or repeated contact with overstrength emulsions may lead to defatting of the skin and/or slight irritation. For
Further information
refer to Section 11 Environmental The product contains mineral oil which will not readily biodegrade in anaerobic conditions and therefore can be environmentally persistent. For further information, refer to Section 12. Special Hazards After Use During use, metalworking emulsions may become contaminated, for example by metal particles and metal salts, other lubricants, and microbiological contaminants. These may increase the irritancy of the emulsions, and in some cases (e.g. contamination by chromium, cobalt and nickel) may be capable of inducing additional hazards. There is a possibility that small amounts of nitrosamines may be formed if sodium nitrite is added to the product.
