Note: Ingredients listed on restricted chemical lists
EC/CAS
215-185-5/1310-73-2
Name of the chemical
sodium hydroxide
Concentration
>=3-<5 >=5% 2-<5% 0,5-<2% 0,5-<2%
General Information
Revision date
2024-08-26
Product name
R1 (B / C)
1.2.1 Relevant identified uses
Laboratory chemicals, Refer to product literature for further details
Emergency telephone
+44 (0)808 100 1920, +44 344 892 0111, +44 845 4647
Icons in SDS
Company Information
company name
Roche Diagnostics Limited
e-mail address of the competent person responsible for the Safety Data Sheet
burgesshill.customerservice@roche.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H290, H314, H318
Hazard statements
Code
Statements
H290
May be corrosive to metals
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture
Signal word
Danger
Hazard statements
H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage.
Prevention
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection.
Response
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P304 + P340 + P310 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/ doctor. P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a P390 Absorb spillage to prevent material damage.
Hazardous Ingredients
Sodium hydroxide
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher
2.1 Classification of the substance or mixture
Classification (REGULATION (EC) No 1272/2008) as amended by GB-CLP Regulation, UK SI 2019/720, and UK SI 2020/1567) Corrosive to metals, Category 1 H290: May be corrosive to metals. Skin corrosion, Sub-category 1B H314: Causes severe skin burns and eye damage. Serious eye damage, Category 1 H318: Causes serious eye damage. R1 (B / C) 2 2.2 Label elements Labelling (REGULATION (EC) No 1272/2008) as amended by GB-CLP Regulation, UK SI 2019/720, and UK SI 2020/1567) Hazard pictograms : Signal word : Danger Hazard statements : H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. Precautionary statements : Prevention: P280 Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection. Response: P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P304 + P340 + P310 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/ doctor. P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/ doctor. P390 Absorb spillage to prevent material damage. Hazardous components which must be listed on the label: Sodium hydroxide 2.3 Other hazards This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. SECTION 3: Composition/information on ingredients 3.2 Mixtures Components Chemical name CAS-No. Classification Concentration EC-No. (% w/w) Index-No. Registration number Sodium hydroxide 1310-73-2 Met. Corr. 1; H290 >= 3 - < 5 R1 (B / C) 3
