Acetylene, Dissolved

Hazard statements (CLP)

H220, H231, H280

Code

Statements

H220

Extremely flammable gas

SECTION 2: Hazards identification

Classification of the substance or mixture

Precautionary statements

P202 - Do not handle until all safety precautions have been read and understood. P210 - Keep away from heat/sparks/open flames/hot surfaces. No smoking P271+P403 Use only outdoors or in a well-ventilated area. P377 - Leaking gas fire: Do not extinguish unless leak can be stopped safely. P381 - Eliminate all ignition sources if safe to do so. P501 - Dispose of contents/container in accordance with section 13 P304+340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P313 - Get medical advice/attention. CGA-PG05 - Use a back flow preventive device in the piping. CGA-PG13 - Fusible plugs in top, bottom, or valve melt at 98 °C to 107 °C (208 °F to 224 °F). Do not discharge at pressures above 15 psi (103 kPa). CGA-PG06 - Close valve after each use and when empty. CGA-PG11 - Never put cylinders into unventilated areas of passenger vehicles. CGA-PG02 - Protect from sunlight when ambient temperature exceeds 52 °C (125 °F). CGA-PG27 - Read and follow the Safety Data Sheet (SOS) before use. OSHA-PG01 - DO NOT REMOVE THIS PRODUCT LABEL (or equivalent wording).

2.3 Other hazards

When using this product in welding and cutting, read and understand the manufacturer's instructions and the precautionary label on the product. For additional information regarding welding and cutting safety conatct the American Welding Society (AWS) www.aws.org and request the publication, "Safety in Welding, Cutting, and Allied Processes". Refer to NFPA 51B, Standard for Fire Prevention During Welding, Cutting, and Other Hotwork.

2.1 Classification of the substance or mixture

GHS Classification in accordance with 29 CFR 1910 (OSHA HCS): Physical, Flammable Gases, 1 Physical, Flammable Gases, B