Note: Ingredients listed on restricted chemical lists
EC/CAS
200-662-2/67-64-1
Name of the chemical
acetone
Concentration
10-<25%
EC/CAS
202-849-4/100-41-4
Name of the chemical
Ethylbenzene
Concentration
5-<10%
EC/CAS
231-944-3/7779-90-0
Name of the chemical
Trizinc bis(orthophosphate)
Concentration
2,5-<5%
EC/CAS
204-658-1/123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
1-<2,5%
EC/CAS
203-625-9/108-88-3
Name of the chemical
Toluene
Concentration
0,1-<0,3%
EC/CAS
432-430-3
Name of the chemical
Reaction mass of N,N'-ethane-1,2-diylbis(hexanamide) and 12-hydroxy-N-[2-[(1-oxyhexyl)amino]ethyl]octadecanamide and N,N'-ethane-1,2-diylbis(12-hydroxyoctadecan amide)
Concentration
1-<2,5%
General Information
Version
4 (Replaced 3
Revision date
2025-08-04
Product name
PRO 84X-M
1.2.1 Relevant identified uses
(Professional users) Protective coating
1.2.2. Uses advised against
All uses not specified in this section or in section 7.3
Emergency telephone
+34 972 478060
Icons in SDS
Company Information
company name
ROBERLO SA
e-mail address of the competent person responsible for the Safety Data Sheet
msds@roberlo.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H315, H319, H373, H411
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture It is advised that, due to the encapsulation of the active ingredient, it is estimated that inhalation hazards could be minimized This criterion applies throughout the entire SDS
Hazard statements
H225 - Highly flammable liquid and vapour. H315 - Causes skin irritation. H319 - Causes serious eye irritation. H373 - May cause damage to organs through prolonged or repeated exposure (Oral). Organs affected: All gross lesions and masses. H411 - Toxic to aquatic life with long lasting effects.
Precautionary statements
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280: Wear protective gloves/protective clothing/eye protection/protective footwear. P303+P361+P353 IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water or shower P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P370+P378 In case of fire Use Foam extinguisher (AB), Dry Chemical Powder (ABC) Fire Extinguisher, Carbon dioxide extinguisher (BC) to extinguish. P501: Dispose of contents/container in accordance with regulations on hazardous waste or packaging and packaging waste respectively. SECTION 2: HAZARDS IDENTIFICATION (continued)
Supplemental label elements
EUH208: Contains Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate, Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate. May produce an allergic reaction.
Hazardous Ingredients
Xylene
2.3 Other hazards
Product does not meet PBT/vPvB criteria Endocrine-disrupting properties: The product does not meet the criteria.
2.1 Classification of the substance or mixture
It is advised that, due to the encapsulation of the active ingredient, it is estimated that inhalation hazards could be minimized. This criterion applies throughout the entire SDS. CLP Regulation (EC) No 1272/2008: Classification of this product has been carried out in accordance with CLP Regulation (EC) No 1272/2008. Aquatic Chronic 2: Hazardous to the aquatic environment, long-term hazard, Category 2, H411 Eye Irrit. 2: Eye irritation, Category 2, H319 Flam. Liq. 2: Flammable liquids, Category 2, H225 Skin Irrit. 2: Skin irritation, Category 2, H315 STOT RE 2: Specific target organ toxicity — Repeated exposure, Hazard Category 2 (Oral), H373 Metals in massive form, alloys, mixtures containing polymers and mixtures containing elastomers do not require a label if they do not present a hazard to human health by inhalation, ingestion or contact with skin or to the aquatic environment in the form in which they are placed on the market, although classified as hazardous.