Note: Ingredients listed on restricted chemical lists
EC/CAS
202-851-5/100-42-5
Name of the chemical
Styrene ( Vinyl benzene )
Concentration
>=10-<20
General Information
Revision date
2018-06-02
Product name
MULTIPLAST
CAS No.
100-42-5
1.2.1 Relevant identified uses
Bodywork repair putty
Emergency telephone
34 972 478060 (8 00-12 45 / 14 15-17 30 h) ROBERLO (Spain) (GMT + 1 00
Icons in SDS
Company Information
company name
Roberlo s.a
e-mail address of the competent person responsible for the Safety Data Sheet
msds@roberlo.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H315, H319, H361d, H372
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
CLP CLASSIFICATION
Flammable liquids, Category 3 H226: Flammable liquid and vapour. Skin irritation, Category 2 H315: Causes skin irritation. Eye irritation, Category 2 H319: Causes serious eye irritation. Reproductive toxicity, Category 2 H361d: Suspected of damaging the unborn child. Specific target organ toxicity - repeated H372: Causes damage to organs through exposure, Category 1 prolonged or repeated exposure if inhaled.
2.2 Label elements
REGULATION (EC) No 1272/2008)
Signal word
Danger
Hazard statements
H226 Flammable liquid and vapour. H315 Causes skin irritation. H319 Causes serious eye irritation. H361d Suspected of damaging the unborn child. H372 Causes damage to organs through prolonged or repeated exposure if inhaled.
Prevention
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P260 Do not breathe vapours.
Response
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P370 + P378 In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.
Storage
P403 Store in a well-ventilated place.
Disposal
P501 Dispose of contents/ container to an approved waste disposal plant.
Hazardous Ingredients
styrene
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
