General Information
Revision date
2016-03-24
Product name
Precautionary Statements: None
REACH No
Signal
Icons in SDS
Company Information
company name
Rev: 03
Section 2
SECTION 2: Hazards identification
Skin Contact: Take off contaminated clothing. Wash off with soap and water. 2.1 Classification of the substance or mixture This product does not contain any components which are hazardous according to the Dangerous Substance Directive (67/548/EEC) or CLP Regulation
2.1 Classification of the substance or mixture
This product does not contain any components which are hazardous according to the Dangerous Substance Directive (67/548/EEC) or CLP Regulation
Potential Acute Health Effects
7.1 Precautions for safe handling Eye Contact May cause slight irritation to eyes. Avoid skin contact. Avoid inhalation of vapour, mist or fumes. Avoid dust creation Inhalation Over-heated wax can produce fumes which may be irritant when when product at ambient temperature. Wash thoroughly after handling. breathed in. 7.2 Conditions for safe storage, including any incompatibilities Ingestion No know significant effects or critical hazards. Store in a cool dry place and keep packaging sealed when not in use. Skin Contact May cause slight irritation to skin. 7.3 Specific end use(s) No data available. 4.3 Indication of any immediate medical attention and special treatment needed 8. EXPOSURE CONTROLS / PERSONAL PROTECTION In contact with or splashed by hot molten liquid Skin Contact Cool the skin immediately with cool water. Treat burns according 8.1 Control parameters to their severity. To avoid damage to the skin no attempt should Follow workplace regulatory exposure limits for all types of airborne dust (e.g. total be made to remove the wax firmly adhering to the skin. Seek dust and respirable dust). -3 medical advice. In the UK the WEL (Workplace Exposure Limit) for Paraffin Wax is 2 mg/m Eye Contact Cool the area immediately with cold water. Seek medical advice. measured as an 8 hour TWA (Time Weighted Average). However in all circum- stances exposure should be kept as low as reasonably possible by suitable and sufficient ventilation and safe working practices. For the equivalent limits in other