Mag-Net Protein Binding Buffer

ReSyn Biosciences Pty Ltd

Revision date : 2025-08-20

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS02
Health risk rating 4
Safety risk rating 3
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

2682-20-4

Name of the chemical

2-methyl-4-thiazoline-3-ketone; 2-methyl-2H-isothiazol-3-one; MIT; Methylisothiazolinone

Concentration

40% ≥0.0015

General Information

Revision date

2025-08-20

Product name

Mag-Net Protein Binding Buffer

1.2.1 Relevant identified uses

Buffer solution to promote protein binding/enrichment used in Mag-Net™ Kit. This product is for research and development use only

Emergency telephone

+2763 358 5538

Icons in SDS

GHS02 GHS07 M004 M009 M059 T016

Company Information

company name

ReSyn Biosciences Pty Ltd

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H225, H317, H319

Hazard statements

Code

Statements

H225

Highly Flammable liquid and vapour

Section 2

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

GHS02 Flame Flammable liquids 2 H225 Highly flammable liquid and vapor. GHS07 Eye irritation 2A H319 Causes serious eye irritation. Sensitization - skin 1 H317 May cause an allergic skin reaction.

2.2 Label elements

The product is classified and labeled according to the Globally Harmonized System (GHS)

Hazard pictograms

GHS02 GHS07

Signal word

Danger

Hazardous Ingredients

2-methyl-2H-isothiazol-3-one

Hazard statements

Highly flammable liquid and vapor. Causes serious eye irritation. May cause an allergic skin reaction. (Contd. of page 1)

Precautionary statements

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground / bond container and receiving equipment. Use explosion-proof [electrical/ventilating/lighting] equipment. Use non-sparking tools. Take action to prevent static discharge. Avoid breathing dust/fume/gas/mist/vapors/spray Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Take off contaminated clothing and wash it before reuse. If skin irritation or rash occurs: Get medical advice/attention. Specific treatment (see on this label). If eye irritation persists: Get medical advice/attention. In case of fire: Use CO2, powder or water spray to extinguish. Store in a well-ventilated place. Keep cool. Dispose of contents/container in accordance with local/regional/national/international regulations. · Unknown acute toxicity: This value refers to knowledge of known, established toxicological or ecotoxicological values. 0 % of the mixture consists of component(s) of unknown toxicity. · Information pertaining to particular dangers for man and environment

Classification system

NFPA/HMIS Definitions 0-Least, 1-Slight, 2-Moderate, 3-High, 4-Extreme · NFPA ratings (scale 0 - 4) Health = 2 3 Fire = 3 2 0 Reactivity = 0 · HMIS-ratings (scale 0 - 4) HEALTH 2 Health = 2 FIRE 3 Fire = 3 REACTIVITY 0 Reactivity = 0

PBT Substances

Not applicable

vPvB Substances

Not applicable

2.3 Other hazards

There are no adverse physical or health effects known that are not covered by the hazard classes of the Hazard Communications Standard.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.