Hazard Rating

Storage

Store in a cool dry place

Health hazards

Sara (Right to Know) Emergency First Aid Procedures: Contact with eyes can and skins can cause irritation. Skin Absorption: Skin absorption is unlikely due to physical properties. Ingestion: Single dose oral LD50 has not been determined. Single does oral toxicity is believed to be low. No hazards anticipated from ingestion incidental to industrial exposure. Inhalation: Vapors are unlikely due to physical properties. Systemic & Other Effects: No specific data available, however, repeated exposures are not anticipated to cause any significant adverse effects. Carcinogenicity: Not Applicable Sara – title 3, sections 311 & 312: All ingredients are non-hazardous 7. First Aid Eyes: Irrigate immediately with water for at least 5 minutes. Mechanical Irritation only. Skin: No adverse effects anticipated by this route of exposure. Ingestion: No adverse effects anticipated by this route of exposure incidental to proper industrial handling. Inhalation: No adverse effects anticipated by this route of exposure. 8. Control Measures Respiratory protection: Not required for normal uses if irritation occurs from breathing-get fresh air! Eye protection: Splash goggles Ventilation: Normal Protective Gloves: Not required. 9. Safe handling procedures In Case of Spills: Sweep up material and transfer to containers. Use caution – the floor will be slippery!

Disposal

Method Bury resin in licensed landfill or burn in approved incinerator according to local, state, and federal regulations. For resin contaminated with hazardous material, dispose of mixture as hazardous material according to local, state and federal regulations. 10. Additional Information: Special precautions to be taken in handling and storage: Practice reasonable care and caution. Metal equipment should be compatible with feed, regenerant, resin form, and effluent of that process. TSCA Considerations: Every different salt or ionic form of an ion-exchange resin is a separate chemical. If you use an ion- exchange resin for ion-exchange purposes and then remove the by-product resin from its vessel or container prior to recovery of the original or another form of the resin or of another chemical, the by- product resin must be listed on the TSCA Inventory (unless an exemption is applicable). It is the responsibility of the customer to ensure that such isolated, recycled by-product resins are in compliance with TSCA. Failure to comply could result in substantial civil or criminal penalties being assessed by the Environmental Production Agency. MSDS Status: Canadian regulatory information added.