RF 1120 Part A

Resin Formulators

Revision date : 2015-05-04

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07
Health risk rating 2
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

7631-86-9

Name of the chemical

Silver adsorbed on silicon dioxide

Concentration

<10%

EC/CAS

37244-96-5

Name of the chemical

nepheline syenite

Concentration

<50%

EC/CAS

25068-38-6

Name of the chemical

4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane

Concentration

>60%

Listed in

General Information

Revision date

2015-05-04

Product name

RF 1120 Part A

Product Synonyms

Epoxy Resin

1.2.2. Uses advised against

Can react vigorously with strong oxidizing agents, strong Lewis or mineral acids In reactions with many curing agents, considerable heat is released

Icons in SDS

GHS07

Company Information

company name

Resin Formulators

e-mail address of the competent person responsible for the Safety Data Sheet

sales@evroberts.com

GHS Information

Signal word

Warning

Hazard Codes

Hazard statements (CLP)

H313, H320, H335

Hazard statements

Code

Statements

H313

May be harmful in contact with skin

Section 2

SECTION 2: Hazards identification

(29 CFR 1910.1200) Classification ACUTE TOXICITY - DERMAL - Category 5 EYE DAMAGE/IRRITATION - Category 2B SPECIFIC TARGET ORGAN TOXICITY (Single E - Category 3

Signal word

Warning

Hazard statements

Causes eye irritation May be harmful in contact with skin May cause respiratory irritation

Response

Call a poison center/doctor/ ... /if you feel unwell. If eye irritation persists: Get medical advice/attention. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If inhaled: Remove person to fresh air and keep comfortable for breathing.

Prevention

Avoid breathing dust/fume/gas/mist/ vapors/spray. Use only outdoors or in a well-ventilated area. Wash ...thoroughly after handling.

Storage

Store in a well-ventilated place. Keep container tightly closed. Store locked up.

Disposal

Refer to manufacturer/Supplier for information on recovery/recycling Ingredients of unknown toxicity 0%

Potential Acute Health Effects

Inhalation - Slightly irritating to respiratory ststem. Ingestion - Not expected to be harmful under normal conditions of use. Skin - Irritating to the skin. May cause sensitization by skin contact. Heated material can cause thermal burns. Eyes - Irritating to the eyes. Heated material can cause thermal burns.

Potential chronic health

Effects No known significant effects or critical hazards Carcinogenicity: No known significant effects or critical hazards. Mutagenicity: No known significant effects or critical hazards.

Teratogenic Effects

No known significant effects or critical hazards Developmental effects: No known significant effects or critical hazards. Fertility effects: No known significant effects or critical hazards. Target organs: Review Section 2 and 11 for any additional assessments. Over-Exposure Signs/Symptoms Inhalation: Adverse symptoms may include the following: respiratory tract irritation, coughing Ingestion: No specific data Skin: Adverse symptoms may include the following: irritation, redness Eyes: Adverse symptoms may include the following: pain or irritation, watering, redness. Medical conditions aggravated by over-exposure: Pre-existing skin disorders may be aggravated by over-exposure to this product. Additional Hazards See section 11 for more detailed information on health effects and symptoms. Section 3. Ingredients CAS Ingredient Name Weight % 7631-86-9 Fumed Silica <10 % 37244-96-5 Nephenline Syenite <50 % 25068-38-6 Phenol, 4,4'-(1-methylethylidene)bis-, polymer with (chloromethyl)oxirane >60 % Occupational exposure limits, if available, are listed in Section 8.

2.1 Classification of the substance or mixture

ACUTE TOXICITY - DERMAL - Category 5 EYE DAMAGE/IRRITATION - Category 2B SPECIFIC TARGET ORGAN TOXICITY (Single E - Category 3 Signal Word Warning Pictogram Hazard Statements Causes eye irritation May be harmful in contact with skin May cause respiratory irritation

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.