Note: Ingredients listed on restricted chemical lists
EC/CAS
64742-65-0
Name of the chemical
Distillates (petroleum), solvent-dewaxed heavy paraffinic; Base oil — unspecified (A complex combination of hydrocarbons obtained by removal of normal paraffins from a petroleum fraction by solvent crystallisation. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of not less than 19 10-6 m2.s-1 at 40 °C.)
Concentration
N/A
EC/CAS
64742-54-7
Name of the chemical
Distillates (petroleum), hydrotreated heavy paraffinic; Base oil — unspecified (A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil of at least 19 10-6 m2.s-1 at 40 °C. It contains a relatively large proportion of saturated hydrocarbons.)
Concentration
N/A
EC/CAS
64742-56-9
Name of the chemical
Distillates (petroleum), solvent-dewaxed light paraffinic
Concentration
N/A
General Information
Revision date
2015-05-15
Product name
Bio-Metal Cool HD (Water Emulsifiable Metal Working Fluid)+ biocide
Product Synonyms
None
1.2.1 Relevant identified uses
Biobased Water Emulsifiable Cutting Fluid for Metal Working
Icons in SDS
Company Information
company name
Renewable Lubricants, Inc
GHS Information
Signal word
Warning
Section 2
Health hazards
Serious Eye Damage/Eye Category 2B Irritation Unknown toxicity Acute toxicity, oral 0.0 % Acute toxicity, dermal 0.0 % Acute toxicity, inhalation, vapor 56 % Acute toxicity, inhalation, dust 55 % or mist
Hazard pictograms
No symbol
Signal word
Warning
Hazard statements
Causes eye irritation.
Prevention
Wash thoroughly after handling.
Response
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Disposal
Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal. Other hazards which do not result None identified.