Percent

Physical hazards

Not classified

Health hazards

Not classified

Environmental hazards

Not classified 3.4 Emergency Overview: To the best of our knowledge, information and data, we couldn't know the health and environmental hazards. 3. INFORMATION ON INGREDIENTS Ingredient Concentration CAS No. ECN No. Acrylic Acid 9 9033-79-8 4. FIRST AID MEASURES 4.1 Skin Exposure: In case of contact, immediately wash skin with soap and copious amounts of water. If irritation persists, seek medical advice. 4.2 Eye Exposure: In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. If irritation persists, seek medical attention. 4.3 Inhalation Exposure: If inhaled, move to a ventilated area. 4.4 Oral Exposure: If swallowed, immediately wash out mouth with water provided person is conscious. Seek medical attention. 5. FIRE FIGHTING MEASURES 5.1 Extinguishing Media: Water spray, Dry chemical, Carbon dioxide or appropriate foam. 5.2 Firefighting: Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Uninvolved persons should evacuate to a safe place. 6. ACCIDENTAL RELEASE MEASURES 6.1 Procedure of Personal Precaution: Exercise appropriate precautions to minimize direct contact with skin or eyes and prevent inhalation of dust. 6.2 Methods for Cleaning up: Sweep up with spade and transfer to a dry, clean, lidded container for disposal. Avoid raising dust. Ventilate area and wash spill site after material pickup is complete. 6.3 Environmental precautions: Do not let product enter drains. 7. HANDLING AND STORAGE 7.1 Handling: Wear appropriate protective clothing and safety gloves. Avoid inhalation. Avoid formation of dust. Avoid contact with eyes, skin and clothing. Keep away from ignition sources, heat and flame. 7.2 Incompatibilities: Strong oxidizing agents, bases. No smoking at working site.

Storage

Store in cool place. Keep container tightly closed in a dry and well ventilated place. Keep away from ignition sources, heat and flame. 8. EXPOSURE CONTROL/PPE 8.1 Engineering Controls: Mechanical exhaust required. Safety shower and eye bath. 8.2 Personal Protective Equipment: 8.2.1 Respiratory: Government approved respirator if needed. 8.2.2 Eye: Chemical safety goggles if needed. 8.2.3 Clothing: Wear appropriate protective clothing. 8.2.4 Hand: Protective gloves. 8.2.5 Other Protection: No smoking, drinking and eating at working site. Wash thoroughly after handling. 9. PHYSICAL CHEMICAL PROPERTIES 9.1 Appearance: Off-white granule crystal 9.2 Odour: Weak odour 9.3 Melting Point/"C: >35o·c 9.4 pH Value: Not applicable 9.5 Solubility: When react with water, curing phenomenon occurs. 10. STABILITY AND REACTIVITY 10.1 Stability: Stable under normal temperatures and pressures. 10.2 Conditions to Avoid: Moisture. 10.3 Materials to Avoid: Strong oxidizing agents, bases. 10.4 Hazardous Polymerization: Will not occur. 10.5 Hazardous Decomposition Products: Carbon oxides, Sodium oxides. 11. TOXOLOGICAL INFORMATION 11.1 Acute toxicity: No data available. 11.2 Skin corrosion/irritation: No data available. 11.3 Serious eye damage/irritation: No data available. 11.4 Bioaccumulate potential: No data available.

ECOLOGICAL INFORMATION

12.1 Toxicity: No data available.