REEF-SPEC CARBON

SECTION 2: Hazards identification

1272/2008 Classification of the substance or mixture

Hazard pictograms

Not required Not required

Signal word

Not required Not required

Hazard statements

Not required Not required

Precautionary statements

Not required Not required

Other hazards

In the event of dust formed by mechanical action (sanding, sawing, etc..), this dust may cause irritation by inhalation and contact with eyes. May cause CO and CO2 emanations in the event of a fire. According to the ECHA Guidance on chemical safety assessment, Chapter R11, section R11.1.2.1: "The PBT and vPvB criteria of Annex XIII to the Regulation do not apply to inorganic substances". As Activated Carbon - HDS type is to be considered as an inorganic substance, the PBT assessment is not applicable. Wet Activated Carbon depletes oxygen from air and, therefore, dangerously low levels of oxygen may be encountered. Whenever workers enter a vessel containing activated carbon, the oxygen content should be determined and work procedures for potentially low oxygen areas should be followed. SECTION 3: Composition/information on ingredients 3.2 Mixtures: Substance name Identifiers % CLP/GHS OSHA HCS Classification ACTIVATED CARBON - HIGH CAS: 7440-44-0 DENSITY SKELETON EC: 931-328-0 REACH: 01-2119488894- 16-**** See section 16 for the full text of the H-statements declared above. There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section. Occupational exposure limits, if available, are listed in section 8.

2.1 Classification of the substance or mixture

mixture Classification according to 29 CFR 1910.1200 (OSHA HCS): Not classified Classification in accordance to Regulation (EC) No. 1272/2008 (CLP): Not classified