Nokorode Regular Paste Flux

Hazard statements (CLP)

H302, H315, H319

Code

Statements

H302

Harmful if swallowed

SECTION 2: Hazards identification

OSHA Hazards EMERGENCY OVERVIEW

Physical hazards

None

Health hazards

Acute Toxicity Oral: Not Classified Dermal: Not Classified Inhalation: Not Classified Skin Corrosion/Irritation: Not Classified Serious Eye Damage/Eye Irritation: Not Classified Respiratory or Skin Sensitization: Not Classified Page 1 NOKORODE® REGULAR Germ Cell Mutagenicity: Not Classified Carcinogenicity: Not Classified Reproductive Toxicology: Not Classified Target Organ Systemic Toxicity - Single Exposure: Not Classified Target Organ Systemic Toxicity - Repeated Exposure: Not Classified Aspiration Toxicity: Not Classified

Environmental hazards

Hazardous to the Aquatic Environment: Not Classified Acute aquatic toxicity: Not Classified Chronic aquatic toxicity: Not Classified Bioaccumulation potential: Not Classified Rapid degradability: Not Classified GHS Label elements, including precautionary statements GHS07: Exclamation Mark/Irritant

Signal word

Hazard Statements H302 - Harmful if swallowed H315 - Causes skin irritation H319 - Causes serious eye irritation

Precautionary statements

P102 - Keep out of reach of children. P262 - Do not get in eyes, on skin, or on clothing. P264 - Wash hands thoroughly after handling. P281 Use personal protective equipment as required. Summary Of Acute Hazards Irritation to respiratory system from fumes evolved during soldering. Eye contact may cause intense irritation and injury. Route Of Exposure, Signs And Symptoms INHALATION Irritation to respiratory system from fumes evolved during soldering. EYE CONTACT Contact may cause intense irritation and injury. SKIN CONTACT May cause skin irritation. INGESTION Nausea, vomiting, irritation to digestive system. Page 2 NOKORODE® REGULAR SUMMARY OF CHRONIC HAZARDS Short term effects to liver and kidneys can occur. Chemical irritation from continued skin contact can occur. Continuous industrial use in small unventilated areas may result in sufficient inhalation of solder and flux fumes to cause lung damage and irritation of respiratory tract.

Medical Conditions Generally Aggravated by Exposure

Individuals with pre-existing or chronic diseases of the eyes, skin, respiratory system, cardiovascular system, gastrointestinal system, liver, or kidneys may have increased susceptibility to excessive exposure.

2.1 Classification of the substance or mixture

Physical Hazards None Health Hazards Acute Toxicity: Oral: Not Classified Dermal: Not Classified Inhalation: Not Classified Skin Corrosion/Irritation: Not Classified Serious Eye Damage/Eye Irritation: Not Classified Respiratory or Skin Sensitization: Not Classified Page 1 NOKORODE® REGULAR Germ Cell Mutagenicity: Not Classified Carcinogenicity: Not Classified Reproductive Toxicology: Not Classified Target Organ Systemic Toxicity - Single Exposure: Not Classified Target Organ Systemic Toxicity - Repeated Exposure: Not Classified Aspiration Toxicity: Not Classified ENVIRONMENTAL HAZARDS Hazardous to the Aquatic Environment: Not Classified Acute aquatic toxicity: Not Classified Chronic aquatic toxicity: Not Classified Bioaccumulation potential: Not Classified Rapid degradability: Not Classified GHS Label elements, including precautionary statements GHS07: Exclamation Mark/Irritant Signal Word: Warning Hazard Statements: H302 - Harmful if swallowed. H315 - Causes skin irritation. H319 - Causes serious eye irritation. Precautionary Statements: P102 - Keep out of reach of children. P262 - Do not get in eyes, on skin, or on clothing. P264 - Wash hands thoroughly after handling. P281 Use personal protective equipment as required. Summary Of Acute Hazards Irritation to respiratory system from fumes evolved during soldering. Eye contact may cause intense irritation and injury. Route Of Exposure, Signs And Symptoms INHALATION Irritation to respiratory system from fumes evolved during soldering. EYE CONTACT Contact may cause intense irritation and injury. SKIN CONTACT May cause skin irritation. INGESTION Nausea, vomiting, irritation to digestive system. Page 2 NOKORODE® REGULAR SUMMARY OF CHRONIC HAZARDS Short term effects to liver and kidneys can occur. Chemical irritation from continued skin contact can occur. Continuous industrial use in small unventilated areas may result in sufficient inhalation of solder and flux fumes to cause lung damage and irritation of respiratory tract. MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE Individuals with pre-existing or chronic diseases of the eyes, skin, respiratory system, cardiovascular system, gastrointestinal system, liver, or kidneys may have increased susceptibility to excessive exposure. Section 3 – comPoSition/information on ingredientS Ingredient: Zinc Chloride Percentage By Weight: 10-25 CAS Number: 7646-85-7 EC#: 231-592-0 Ingredient: Ammonium Chloride Percentage By Weight: 10-25 CAS#: 12125-02-9 EC#: 235-186-4 Ingredient: Petrolatum Percentage By Weight: 70-90 CAS#: 8009-03-8 EC#: 232-373-2 Section 4 – firSt aid meaSureS If inhaled: If overcome by exposure, remove victim to fresh air immediately. Give oxygen or artificial respiration as needed. Obtain emergency medical attention. Prompt action is essential. If on skin: Immediately wash with soap and water. Remove and wash any contaminated clothing. If in eyes: Immediately flush with large amounts of water for at least 15 minutes. Get prompt medical attention if irritation persists. If swallowed: If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person. Page 3 NOKORODE® REGULAR Section 5 – fire figHting meaSureS Extinguishing Media Foam, dry chemical, carbon dioxide or water fog. Special Fire Fighting Procedures: Wear self-contained full face piece breathing apparatus and other protective clothing. Hazardous decomposition products possible (see Section 10). May release ZnO and HCl fumes. Unusual Fire And Explosion Hazards: Heat may build up pressure and rupture closed containers. Section 6 – accidental releaSe meaSureS Steps To Be Taken In Case Material Is Released Or Spilled: Wipe up spills to prevent footing hazard. Avoid flushing into sewers, drains, waterways and soil. Wear protective clothing during clean up. Section 7 – Handling and Storage Precautions To Be Taken In Handling And Storing: Keep container closed and upright when not in use. Store flux at ambient conditions. Wash thoroughly after handling to remove all residue. Other Precautions: Avoid prolonged or repeated contact with skin or clothing. Empty containers may contain residues; treat as if full and observe all products precautions. Do not reuse empty containers. Section 8 – exPoSure controlS/PerSonal Protection Ingredient Units Zinc Chloride ACGIH TLV: 1 mg/m3 OSHA PEL: 1 mg/m3 Ammonium Chloride ACGIH TLV: 10 mg/m3 OSHA PEL: 10 mg/m3 Petrolatum ACGIH TLV: N/D OSHA PEL: N/D Respiratory Protection (Specify Type): In confined poorly ventilated areas, use NIOSH/MSHA approved air purifying or supplied air purifying or supplied air respirators during soldering operations until fumes have dissipated. Ventilation − Local Exhaust: Acceptable