Note: Ingredients listed on restricted chemical lists
EC/CAS
9002-93-1
Name of the chemical
Octylphenolethoxylates (OPEO)
Concentration
0.5%
EC/CAS
108-95-2
Name of the chemical
Phenol
Concentration
0.1%
General Information
Revision date
2019-04-29
Product name
CHOLESTEROL (CHOL)
Emergency telephone
+44 (0) 28 9442 2413
Icons in SDS
Company Information
company name
Randox Laboratories Ltd., 55 Diamond Road, Crumlin, Co.
e-mail address of the competent person responsible for the Safety Data Sheet
sds@randox.com
GHS Information
Signal word
R1. Reagent
Hazard Codes
Hazard statements (CLP)
H226, H319
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
According to Regulation (EC) No. 1272/2008 (CLP)] Classification of the substance or mixture
Hazard pictograms
R1. Reagent None assigned Cal. Standard
Signal word
R1. Reagent None assigned Cal. Standard Warning
Hazard statements
R1. Reagent None assigned SHEET Cal. Standard Flam. Liq. 3: H226 - Flammable liquid and vapour. Eye Irrit. 2: H319 - Causes serious eye irritation.
Precautionary statements
R1. Reagent Not applicable. Cal. Standard P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 - Keep container tightly closed. P264 - Wash thoroughly after handling. P303+P361+P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 - If eye irritation persists: Get medical advice/attention. P403+P235 - Store in a well-ventilated place. Keep cool. P501 - Dispose of contents/container according to local / national guidelines.
Supplemental label elements
None
2.3 Other hazards
These components contain <0.1% sodium azide. Avoid ingestion or contact with skin or mucous membranes. Sodium azide reacts with lead or copper plumbing to form potentially explosive azides. When disposing of such reagents flush with large volumes of water to prevent azide build up. Exposed metal surfaces should be cleaned with 10% sodium hydroxide.
2.1 Classification of the substance or mixture
2.1.1 Regulation (EC) No. 1272/2008 R1. Reagent: (CLP) Not a hazardous mixture according to Regulation (EC) No. 1272/2008 (CLP) Cal. Standard: Flam. Liq. 3: H226; Eye Irrit. 2: H319; 2.1.2 Additional Information
