U2020 Ultimeg 2020 Base

Hazard statements (CLP)

H315, H317, H319, H411

Code

Statements

H315

Causes skin irritation

SECTION 2: Hazards identification

GHS Classification in Accordance with 29 CFR 1910 (OSHA HCS): Classification of the substance or mixture

Signal word

WARNING

Hazard statements

H315 - Causes skin irritation H319 - Causes serious eye irritation H317 - May cause an allergic skin reaction H411 - Toxic to aquatic life with long lasting effects

Precautionary statements

P261 - Avoid breathing mist/spray. P273 - Avoid release to the environment. P302+352 - IF ON SKIN: Wash with soap and water. P305+351+338 - IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P264 - Wash skin thoroughly after handling. P272 - Contaminated work clothing should not be allowed out of the workplace. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P321 - Specific treatment (see information on this label). P333+313 - If skin irritation or a rash occurs: Get medical advice/attention. P337 - If eye irritation persists: Get medical advice/attention. Page 2 of 6 P362 - Take off contaminated clothing and wash before reuse. P501 - Dispose of contents/container to approved disposal facility.

Principle Routes of Exposure

Eyes; Ingestion; Inhalation; Skin; Target Organs: Eyes; Skin; Respiratory system; Cental nervous system; Kidneys. Inhalation: Slightly irritating to the respiratory system. Skin Contact: If contact with heated liquid (140 F) treat for thermal burns. At room temperature, contact may cause mild skin irritation including redness, burning, and drying and cracking of skin. Eye Contact: Irritating to eyes. Heated material can cause thermal burns. Ingestion: Not expected to be harmful under normal conditions of use. NFPA: Health = 2, Fire = 1, Reactivity = 0, Specific Hazard = n/a HMIS III: Health = 2(Chronic), Fire = 1, Physical Hazard = 0 HMIS PPE: X - Consult your supervisor for special instructions 2 1 2 0 X

2.1 Classification of the substance or mixture

GHS Classification in accordance with 29 CFR 1910 (OSHA HCS): Health, Skin corrosion/irritation, 2 Health, Serious Eye Damage/Eye Irritation, 2 A Health, Respiratory or skin sensitization, 1 Skin Environmental, Hazards to the aquatic environment - Chronic, 2 GHS Label elements, including precautionary statements GHS Signal Word: WARNING GHS Hazard Pictograms: GHS Hazard Statements: H315 - Causes skin irritation H319 - Causes serious eye irritation H317 - May cause an allergic skin reaction H411 - Toxic to aquatic life with long lasting effects GHS Precautionary Statements: P261 - Avoid breathing mist/spray. P273 - Avoid release to the environment. P302+352 - IF ON SKIN: Wash with soap and water. P305+351+338 - IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P264 - Wash skin thoroughly after handling. P272 - Contaminated work clothing should not be allowed out of the workplace. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P321 - Specific treatment (see information on this label). P333+313 - If skin irritation or a rash occurs: Get medical advice/attention. P337 - If eye irritation persists: Get medical advice/attention. Page 2 of 6 P362 - Take off contaminated clothing and wash before reuse. P501 - Dispose of contents/container to approved disposal facility. Hazards not otherwise classified (HNOC) or not covered by GHS Route of Entry: Eyes; Ingestion; Inhalation; Skin; Target Organs: Eyes; Skin; Respiratory system; Cental nervous system; Kidneys. Inhalation: Slightly irritating to the respiratory system. Skin Contact: If contact with heated liquid (140 F) treat for thermal burns. At room temperature, contact may cause mild skin irritation including redness, burning, and drying and cracking of skin. Eye Contact: Irritating to eyes. Heated material can cause thermal burns. Ingestion: Not expected to be harmful under normal conditions of use. NFPA: Health = 2, Fire = 1, Reactivity = 0, Specific Hazard = n/a HMIS III: Health = 2(Chronic), Fire = 1, Physical Hazard = 0 HMIS PPE: X - Consult your supervisor for special instructions 2 1 2 0 X 3 COMPOSITION/INFORMATION ON INGREDIENTS Ingredients: Cas# % Chemical Name --------------------------------------------------------------- 0 90-95% Epoxy Resin Proprietary 68609-97-2 5-10% Alkyl Glycidyl Ether 4 FIRST AID MEASURES Inhalation: If inhaled, move person to fresh air. If not breathing, give artificial respiration. Consult a physician. Skin Contact: Wash with soap and water. Consult a physician if irritation continues. Eye Contact: Immediately flush with clear water for 15 minutes, including under eyelids. Consult a doctor. Ingestion: Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 5 FIRE FIGHTING MEASURES Flammability: Not Flammable, however product will support combustion. Flash Point: >300 F (148 C) Flash Point Method: Closed Cup (Seta) Autoignition Temp: Not available. LEL: N/A UEL: N/A Conditions to avoid: Heat, sparks, flame, red hot metal. Extinguishing Media: CO2, dry chemical, or universal aqueous film forming foam. Hazardous Combustion Products: Oxides of Carbon (CO, CO2), smoke and vapors. Unsuitable Extinguishing Media: Water Jet or water based fire extinguishers. Use water spray to cool fire exposed containers as contents can rupture violently from heat developed pressure. Page 3 of 6 Fireman should wear self contained breathing apparatus. 6 ACCIDENTAL RELEASE MEASURES Use personal protection recommended for this material. Isolate hazard area and deny entry to unnecessary and unprotected personnel. Keep out of drains, sewers, ditches, and waterways. Avoid use of water. Released content may be contained with oil/solvent absorbant pads, booms, and or absorbants. Avoid breathing vapors and ventilate area well. Remove sources of ignition and use non-sparking equipment. Soak up material with inert absorbant and place in safety containers for proper disposal. Prohibited Cleanup Materials: Combustible absorbent materials such as sawdust, and use of equipment that may cause sparking. Report releases that reach surface water or groundwater in any amount. Spills, leaks and overfills from underground regulated storage tanks should also be reported. Reportable quantities for spills onto the ground depend on site conditions such as type of soil and material spilled. Consult your local regulatory agency if unsure of reporting requirements. 7 HANDLING AND STORAGE Handling Precautions: Avoid breathing vapors or mist. Avoid contact with eyes, skin, or clothing. Consider normal working hygiene. Do not expose containers to open flame, excessive heat, or direct sunlight. Do not puncture or drop containers. Handle with care and avoid spillage on the floor (slippage). Keep away from sources of ignition. Keep material out of reach of children. Launder contaminated clothing. Use approved containers only. Storage Requirements: Keep containers tightly closed and stored in a well ventilated area. 8 EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering Controls: Use with adequate ventilation. General ventilation (typically 10 air changes per hour) should be used. Rates should be matched to conditions. Local exhaust ventilation or an enclosed handling system may be necessary to control air contamination below that of the lowest OEL. Personal Protective HMIS PP, X | Consult your supervisor for special instructions Equipment: Chemical resistant gloves; Chemical safety glasses; NIOSH approved respirator; Organic vapor respirator with dust, mist, and fume filters; Alkyl Glycidyl Ether (68609-97-2) [5-10%] : no data available 9 PHYSICAL AND CHEMICAL PROPERTIES