Stay Silv White Flux

SECTION 2: Hazards identification

result in GHS classification: Classified according to the criteria of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), The United States Occupational Safety and Health Administration's Hazard Communication Standard (29 CFR 1910.1200), Canada’s Hazardous Product Regulations and Mexico’s Harmonized System for the Identification and Communication of Hazards and Risks from Hazardous Chemicals in the Workplace. Hazard Classification

Health hazards

Acute toxicity (Oral) Category 4 Acute toxicity (Dermal) Acute toxicity (Inhalation - mist) Toxic to reproduction Category 3 dust and Category 4 Category 2

Hazard pictograms

Ba

Signal word

Danger

Hazard statements

Toxic in contact with skin. Harmful if swallowed or if inhaled. Suspected of damaging fertility or the unborn child

Prevention

Wear protective gloves/protective clothing/eye protection/face protection. Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required.

Response

IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN Wash with plenty of water/... IF SWALLOWED Call a POISON CENTRE/doctor/... if you feel unwell. Rinse mouth. Call a POISON CENTER/doctor if you feel unwell. Specific measures (see this label). Take off immediately all contaminated clothing. Wash contaminated clothing before reuse.

Storage

Store locked up.

Disposal

Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal. Other hazards which do not Heat rays (infrared radiation) from flame or hot metal can injure eyes. result in GHS classification Overexposure to brazing fumes and gases can be hazardous. Read and understand the manufacturer's instructions, Safety Data Sheets and the precautionary labels before using this product. Substance(s) formed under the Fumes produced from use of this product may contain the following conditions of use constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the solder, brazing consumable, flux material or base metal, or base metal coating not listed below. Hydrogen fluoride, a possible decomposition product, is extremely corrosive and a poison by all routes of entry. Hydrogen fluoride can penetrate the skin and produce burns, which may not be immediately painful or visible; the burns impact the lower layers of skin and bone tissue. Hydrogen fluoride exposures involving 20 percent of the body or more can be fatal through systemic fluoride poisoning. Chemical Identity CAS-No. Carbon dioxide Carbon monoxide Nitrogen dioxide Ozone 7 124-38-9 630-08-0 10102-44-0 10028-15-6 ON INGREDIENTS ~~ mee -

2.1 Classification of the substance or mixture

Health Hazards Acute toxicity (Oral) Category 4 Acute toxicity (Dermal) Category 3 Acute toxicity (Inhalation - dust and Category 4 mist) Toxic to reproduction