Note: Ingredients listed on restricted chemical lists
EC/CAS
9005-25-8
Name of the chemical
Starch
Concentration
N/A
EC/CAS
24937-78-8
Name of the chemical
ethylene-vinyl acetate copolymer wax
Concentration
N/A
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
EC/CAS
64742-54-7
Name of the chemical
Distillates (petroleum), hydrotreated heavy paraffinic
Concentration
N/A
EC/CAS
77-90-7
Name of the chemical
TBAC, Tributyl O-acetylcitrate
Concentration
N/A
EC/CAS
55406-53-6
Name of the chemical
3-Iodo-2-propynylbutylcarbamate
Concentration
N/A
EC/CAS
108-01-0
Name of the chemical
2-dimethylaminoethanol
Concentration
N/A
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
N/A
General Information
Revision date
2013-11-15
Product name
QuietRock 500 Damped Wallboard
supplier name
QuietRock by PABCO Gypsum
Manufacturer Name
QuietRock by PABCO Gypsum
Icons in SDS
Company Information
company name
QuietRock by PABCO Gypsum
e-mail address of the competent person responsible for the Safety Data Sheet
info@quietrock.com
Section 2
SECTION 2: Hazards identification
CAUTION: Cutting, sanding, or otherwise working with this product may generate large amounts of dust. Dust can be irritating to the eyes, skin, and respiratory system.
Principle Routes of Exposure
Skin contact, eye contact, and inhalation
Potential health effects
Eye – Exposure to airborne dust may cause immediate or delayed mechanical irritation of eyes. Skin – Dust and glass fibers may produce itching, rash and redness. Ingestion Hazards – Not applicable under normal conditions of use. May result in internal discomfort or ill effects if large quantities are swallowed. Inhalation hazards – Exposure to airborne dust generated during the handling or use of the product may cause irritation to nose, throat and upper respiratory system. Pre-existing upper respiratory and lung diseases may be aggravated. Persons subjected to large amounts of this dust will be forced to leave area because of nuisance conditions such as coughing, sneezing and nasal irritation. Labored breathing may occur after excessive inhalation. Exposures to respirable crystalline silica have not been documented during normal use of this product. However, good housekeeping practices and industrial hygiene monitoring is recommended when the potential for significant exposure exists.
Medical Conditions Generally Aggravated by Exposure
Because of irritating properties, dust and glass fibers may aggravate preexisting skin, eye, and respiratory conditions. Target Organs: Skin, eyes and respiratory system
