Note: Ingredients listed on restricted chemical lists
EC/CAS
822-06-0
Name of the chemical
Hexamethylene diisocyanate
Concentration
N/A
EC/CAS
212-485-8
Name of the chemical
Hexamethylene diisocyanate
Concentration
N/A
General Information
Revision date
2014-11-05
Product name
SynDeck Matte Sealer Part A
1.2.1 Relevant identified uses
Topcoat
Manufacturer Name
Epmar Corporation
Emergency telephone
(24/7
Icons in SDS
Company Information
company name
Quaker Chemical B.V
e-mail address of the competent person responsible for the Safety Data Sheet
SHEQEU@quakerchem.com
Section 2
CLP CLASSIFICATION
see SECTION 16
EU Classification
Directive 1999/45/EC
Hazard statements
Xn - Harmful Xn - Harmful
R-phrase(s)
R20 - Harmful by inhalation. R37 - Irritating to respiratory system. R42/43 - May cause sensitization by inhalation and skin contact. R20 - Harmful by inhalation. R37 - Irritating to respiratory system. R42/43 - May cause sensitization by inhalation and skin contact.
Additional information
For full text of R- phrases: see SECTION 16. Classification procedure: Calculation method
Contains
Hexamethylene diisocyanate, Homopolymer of hexamethylene diisocyanate, Hydrophilic Aliphatic Polyisocyanate
S-phrase(s)
S22 - Do not breathe dust. S23 - Do not breathe gas/fumes/vapours/aerosols. S24 - Avoid contact with the skin. S37 - Wear suitable gloves. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show label where possible). S60 - This material and its container must be disposed of as hazardous waste. S63 - In case of accident by inhalation: remove casualty to fresh air and keep at rest. S64 - If swallowed, rinse mouth with water (only if the person is conscious). S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
2.3 Other hazards
None under normal use
