Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2019-07-22
Product name
Safetysorb Chlorine Gas Adsorbent
Product Synonyms
Sodium Thiosulfate
CAS No.
1344-28-1
1.2.1 Relevant identified uses
This product is intended for use in gas-phase air filtration
Icons in SDS
Company Information
company name
Pure Air Filtration
GHS Information
Signal word
Warning
Section 2
SECTION 2: Hazards identification
Irritant, Category 2 Eye Irritation, Category 2
Hazard statements
Codes H315: Causes Skin Irritation H319: Causes Serious Eye Irritation GHS Precaution Codes P264 Wash hands thoroughly after handling P280: Wear protective gloves/protective clothing/eye protection/face protection. GHS Response Codes P302+352 IF ON SKIN wash with plenty of soap and water P332+313 IF SKIN irritation occurs Get medical advice/attention P362: Take off contaminated clothing and wash before reuse. P305+P351+P338+P337+P313 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention. GHS Storage Codes: P401: Store in a cool, dry area in enclosed containers.
Most important adverse effects
-If crushed or handled extensively, dust may evolve and can be irritating to the eyes, skin or respiratory tract. -Confined space entry. Appropriate safety precautions should be taken when entering any confined space. Entering containers or media vessel/tanks housing activated carbon for inspection, maintenance, etc. may constitute a confined space entry. In confined spaces, activated carbon may remove oxygen from the air causing severe hazards for workers entering such spaces. Before and during the entrance of a confined space all local, state, and federal regulations should be followed.
Potential health effects
—The following medical conditions may be aggravated by exposure to the product: asthma, chronic lung disease, and skin rashes.
