Note: Ingredients listed on restricted chemical lists
EC/CAS
202-851-5/100-42-5
Name of the chemical
Styrene ( Vinyl benzene )
Concentration
15-18
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
<15
General Information
Version
4
Revision date
2019-04-15
Product name
MULTISOFT FILLER
Product name
MULTISOFT FILLER
Identification on the label/Trade name
MULTISOFT
1.2.1 Relevant identified uses
For professional use in car refinish
1.2.2. Uses advised against
No further data available
Emergency telephone
+48 34 329 45 03
Icons in SDS
Company Information
company name
Przedsiębiorstwo RANAL Sp. z o.o
e-mail address of the competent person responsible for the Safety Data Sheet
ranal@ranal.pl
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H226, H315, H319, H361d, H372
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Contains
Styrene.
Hazard pictograms
GHS02 GHS07 GHS08 *
Signal word
DANGER Risk index: H226 Flammable liquid and vapour. H315 Causes skin irritation. H319 Causes eye irritation. H361d Suspected of damaging the unborn child. H372 May cause damage to organs through prolonged or repeated exposure. Safety index: P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P260 Do not breathe dust/vapours. * P271 Use only outdoors or in a well-ventilated area P280 Wear protective gloves/protective clothing/eye protection/face protection. P312 Call a POISON CENTER or doctor/physician if you feel unwell.
Supplemental label elements
EUH211 Warning! Hazardous respirable droplets may form if sprayed. Do not breathe spray or vapour.*
2.3 Other hazards
Vapours of styrene form explosive mixtures with air. Vapours are heavier than air and accumulate near the ground and in the lower parts of rooms. Styrene may polymerize under the influence of high temperature or as a result of contact with strong oxidizing agents, peroxides, strong acids, alkalis, metal salts, copper and its alloys. Styrene polymerization is a highly exothermic process. Does not contain PBT/vPvB substances ≥ 0.1% assessed in accordance with Annex XIII of REACH. * The mixture does not contain any substance(s) included in the list established in accordance with Art. 59 sec. 1 of the REACH Regulation due to endocrine disrupting properties or is not identified as endocrine disrupting in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 in a concentration equal to or greater than 0,1 % by weight. *
