Note: Ingredients listed on restricted chemical lists
EC/CAS
212-485-8/822-06-0
Name of the chemical
Hexamethylene diisocyanate
Concentration
1-3%
General Information
Version
05/12/2022
Revision date
2022-12-05
Product name
Cold Melt UV Top Hardener
1.2.1 Relevant identified uses
Polyurethane coating
Emergency telephone
+44 (0) 1865 407 333
Icons in SDS
Company Information
company name
Proteus Waterproofing Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
enquiries@proteuswaterproofing.co.uk
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H332, H334, H335
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture Skin Sens. 1; H317, May cause an allergic skin reaction Acute Tox. 4; H332, Harmful if inhaled Resp. Sens. 1; H334, May cause allergy or asthma symptoms or breathing difficulties if inhaled STOT SE 3; H335, May cause respiratory irritation
Signal word
Danger
Hazard statements
May cause an allergic skin reaction. (H317) Harmful if inhaled. (H332) May cause allergy or asthma symptoms or breathing difficulties if inhaled. (H334) May cause respiratory irritation. (H335)
Precautionary statements
General Keep out of reach of children. (P102)
Prevention
Obtain special instructions before use. (P201) Do not handle until all safety precautions have been read and understood. (P202) Keep container tightly closed. (P233) Keep only in original packaging. (P234) Avoid breathing mist/vapour. (P261) Wash hands and exposed skin thoroughly after handling. (P264) Do not eat, drink or smoke when using this product. (P270) Use only outdoors or in a well-ventilated area. (P271) Contaminated work clothing should not be allowed out of the workplace. (P272) Wear face protection/protective gloves/protective clothing. (P280) [In case of inadequate ventilation] wear respiratory protection. (P284)
Response
Do NOT induce vomiting. (P331) IF ON SKIN: Wash with plenty of water and soap. (P302+P352) IF INHALED: Remove person to fresh air and keep comfortable for breathing. (P304+P340) IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. (P305+P351+P338) Call a POISON CENTER/doctor if you feel unwell. (P312) Specific treatment (see instructions on this label). (P321) If skin irritation or rash occurs: Get medical advice/attention. (P333+P313) If experiencing respiratory symptoms: Call a POISON CENTER/doctor (P342+P311) Take off contaminated clothing and wash it before reuse. (P362+P364)
Storage
Store in a well-ventilated place. Keep container tightly closed. (P403+P233) Store locked up. (P405)
Disposal
Dispose of contents/container in accordance with local regulation . (P501)
Hazardous Ingredients
aliphatic polyisocyanate hexamethylene-di-isocyanate
Additional information
EUH066, Repeated exposure may cause skin dryness or cracking. EUH204, Contains isocyanates. May produce an allergic reaction. As from 24 August 2023 adequate training is required before industrial or professional use.
2.3 Other hazards
Additional warnings This mixture/product does not contain any substances considered to meet the criteria classifying them as PBT and/or vPvB. This product does not contain any substances considered to be endocrine disruptors in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605.
2.1 Classification of the substance or mixture
Skin Sens. 1; H317, May cause an allergic skin reaction. Acute Tox. 4; H332, Harmful if inhaled. Resp. Sens. 1; H334, May cause allergy or asthma symptoms or breathing difficulties if inhaled. STOT SE 3; H335, May cause respiratory irritation.