Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
0-55%
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
0-50% 10-30% 10-30%
EC/CAS
94-13-3
Name of the chemical
Propylparaben; propyl 4-hydroxybenzoate
Concentration
<10%
EC/CAS
99-76-3
Name of the chemical
4-hydroxybenzoic acid, methyl ester
Concentration
<10%
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
<100%
General Information
Revision date
2013-04-16
Product name
Diamond Paste (¼µm; ½µm; 1µm; 3µm; 6µm; 9µm)
Product Synonyms
Micron; MICRON+ (MDA, CDA, SND) Series; Synthetic Wheel grit Diamond Abrasive
CAS No.
Mixture
1.2.1 Relevant identified uses
Abrasive cutting tool material used in grinding wheels, lapping and polishing Paste is made with a non-perfumed moisturising cream
Icons in SDS
Company Information
company name
ProSciTech Pty Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
pst@proscitech.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H351, H372
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
2.1 Classification of the substance or mixture
Carcinogen Category 2 Skin Sensitisation Category 1 Specific Target Organ Toxicity – Repeated Exposure Category 1
Signal word
Danger
Hazard statements
H351: Suspected of causing cancer. H317: May cause an allergic skin reaction H372: Causes damage to organs, through prolonged or repeated exposure.
Precautionary statements
P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breather dust/fume/gas/mist/vapours/spray. P261: Avoid breathing dust/fumes/gas/mist/vapours/spray. P264: Wash with soap and water thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P272: Contaminated work clothing should not be allowed out of the workplace. P280: Wear face protection. Specify type of equipment. P281: Use personal protective equipment as required P302+P352 IF ON SKIN Wash with plenty of soap and water P308+P313 IF exposed or concerned Get medical advice/attention P314: Get medical advice/attention if you feel unwell. P333+P313 If skin irritation or rash occurs Get medical advice/attention P363: Wash contaminated clothing before reuse. P405: Store locked up. P501: Dispose of contents/container in accordance with local, state and federal regulations.
Principle Routes of Exposure
Inhalation, ingestion, skin and/or eye contact. Page 2 of 6 Human Health Inhalation: Mists or dry dust can cause congestion and tissue irritation. Ingestion: Tissue irritant. Eyes: Slight irritation, high concentrations may cause conjunctivitis. Skin: Tissue irritant. Nickel may cause dermatitis. Nickel is a contact allergen and sensitizer.
Environmental hazards
No
2.3 Other hazards
Diamond in not a hazardous material. No acute health effects. No chronic health effects. Exposure to the elements listed in section 3, by skin contact, ingestion and inhalation can occur when handling, chemically treating, heat treating, abrasive cutting, grinding, polishing or abrading the surface of this material in a manner which generates particulates. Metallic Nickel is listed by IARC as a Group 2B – Possibly Carcinogenic to Humans. Chronic copper poisoning is typified by hepatic cirrhosis, brain damage and demyelisation, kidney defects and copper deposition in the cornea as exemplified by humans with Wilson’s disease. Sorbolene cream (with 10% glycerin) – this product is not hazardous or dangerous.
