Propspeed Etching Primer Base

Hazard statements (CLP)

H225, H303, H314, H317, H319, H340, H350, H361, H373, H411

Code

Statements

H225

Highly Flammable liquid and vapour

SECTION 2: Hazards identification

Notice 2017 Hazardous Status: This substance is hazardous according to the EPA

Hazardous Ingredients

Classification) Notice 2017 EPA Approval Code: Surface Coatings and Colourants (Flammable, Corrosive, Toxic [6.7]) – HSR002664

Hazard pictograms

Flammable Chronic Irritant Corrosive Ecotoxic

Signal word

Danger HSNO

2.1 Classification of the substance or mixture

Code 3.1B H225 Highly flammable liquid and vapour. Flam. Liq. 2 6.1E (oral) H303 May be harmful if swallowed. Acute Tox. 5 6.4A H319 Causes serious eye irritation. Eye Irrit. 2A 6.5B H317 May cause an allergic skin reaction. Skin Sens. 1 6.6A H340 May cause genetic defects. Muta. 1A 6.7A H350 May cause cancer. Carc. 1A Suspected of damaging fertility or the Repr. 2 6.8B H361 unborn child. May cause damage to organs through STOT RE 2 6.9B H373 prolonged or repeated exposure. Causes severe skin burns and eye Skin Corr. 1C 8.2C H314 damage. Toxic to aquatic life with long lasting Aquatic 9.1B H411 effects. Chronic 2

Prevention

P102 Keep out of reach of children. P103 Read label before use. P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat, sparks, open flames or hot surfaces. No smoking. P233 Keep container tightly closed. P240 Ground/bond container and receiving equipment. Product name: Propspeed Etching Primer Base Review date 24 August 2021 Page | 2 P241 Use explosion-proof electrical, ventilation and lighting. P242 Use only non-sparking tools. P243 Take precautionary measures against static discharge. P260 Do not breathe fumes, vapours and spray. P264 Wash hands thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P273 Avoid release to the environment. P280 Wear protective clothing in Section 8. P281 Use personal protective equipment as required.

Response

Code P101 If medical advice is needed, have product container or label at hand. P310 Immediately call a POISON CENTER or doctor/physician. P314 Get medical advice/attention if you feel unwell. P363 Wash contaminated clothing before reuse. P391 Collect spillage. P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302 +P352 IF ON SKIN: Wash with plenty of soap and water. P303 + P361 + P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P304 + P340 IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313 IF exposed or concerned: Get medical advice/ attention. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P370 + P378 In case of fire: Use AFFF alcohol compatible foam or water spray for extinction.

Storage

Code P405 Store locked up. P403 + P235 Store in a well-ventilated place. Keep cool.

Disposal

Code P501 Dispose of according to local regulations Product name: Propspeed Etching Primer Base Review date 24 August 2021 Page | 3