Note: Ingredients listed on restricted chemical lists
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
<0,2
EC/CAS
203-474-9/107-22-2
Name of the chemical
Glyoxal
Concentration
0,0005-0
EC/CAS
215-279-6
Name of the chemical
Calcium carbonate
Concentration
15-20
General Information
Revision date
2015-01-06
Product name
FENDOLITE MII
1.2.1 Relevant identified uses
Fire protection on structures and vessels in the oil, gas, petrochemical industry 1.2.2
Emergency telephone
+44 (0)1773 837900
Icons in SDS
Company Information
company name
Promat UK Ltd.
e-mail address of the competent person responsible for the Safety Data Sheet
promat@promat.co.uk
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H318, H335
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
CLP CLASSIFICATION
CLP]Mixture/Substance SDS EU 2015 According to Annex II of Regulation (EC) No. 453/2010 (REACH Annex II) Skin Irrit. 2 H315 Eye Dam. 1 H318 Skin Sens. 1 H317 STOT SE 3 H335
Hazard statements
see section 16 : H315 - Causes skin irritation H317 - May cause an allergic skin reaction H318 - Causes serious eye damage H335 - May cause respiratory irritation
2.2 Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP] Extra labelling to displayExtra classification(s) to display
Hazard pictograms
GHS05 GHS07
Signal word
Danger
Hazardous Ingredients
Glyoxal, Portland Cement, sulfuric acid, mono-C12-18-alkyl esters, sodium salts
Precautionary statements
P280 - Wear protective gloves, Protective clothing, eye protection, face protection P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P310 - Immediately call a POISON CENTER, a doctor P302+P352 - IF ON SKIN: Wash with plenty of water and soap P333+P313 - If skin irritation or rash occurs: Get medical advice/attention P261 - Avoid breathing dust, mist, spray P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing P312 - Call a POISON CENTER, a doctor if you feel unwell P501 - Dispose of contents/container to an approved waste disposal plant
Additional information
Skin contact with wet cement, fresh concrete or mortar may cause irritation, dermatitis or burns. May cause damage to products made of aluminium or other non-noble metals.
Adverse physicochemical, human health and environmental effects
May cause respiratory irritation. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage.
Other hazards which do not result in classification
Depending upon the source of the Portland cement, the product could be contaminated with chromium VI. - In several countries, the soluble chromium VI is legally limited to 0.0002% of the total dry weight. If soluble chromium VI is present in the Portland cement above the 0.0002%, a reduction agent has been added to it to keep the content of soluble chromium VI under the 0,0002%. The activity of this reduction agent is limited in time, what limits the shelf life of the product. The product should be used within 1 year after its production date. - If the soluble chromium VI is above the 0.0002% (European Regulation on CLP No 1272/2008): EUH203: Contains chromium (VI). May produce an allergic reaction. Natural contamination of some substances of the preparation with cristalline silica could occur. No cristalline silica is added to the preparation. According to IARC, cristalline silica inhaled in the form of quartz dust is carcinogenic to humans (Group 1). When manipulating and processing the product, respect Occupational Exposure Limits (OEL) or Workplace Exposure Limits (WEL) for the UK, for inhalable and respirable dust. Check the latest Occupational Exposure Limits (OEL) or Workplace Exposure Limits (WEL) for the UK, for airborne contaminants that are applicable in your country.